Infinix x608 flash,With out dongle
Infinix x608 flash,With out dongle
(14-04-2019, 05:09 PM)isyrecord Good day please is there any way I can get my Infinix x608 flashed, without cm2 dongle please
(15-04-2019, 06:40 AM)ALBA3D If you want to flash the device to remove pattern,pin or password you can use my method here
(15-04-2019, 08:13 AM)isyrecord I don't think it going to work for this device I was even trying wipe it by press volume up and power button
It shown only three options and no factory reset option there,
Not only that I want to flash it completely and I discover that it only make connection sound no effect, and I have installed the driver, and before it even connect to the image loader that I want to use, it show battery percent. So I don't know what to do now .
(15-04-2019, 10:53 AM)X3non(15-04-2019, 08:13 AM)isyrecord I don't think it going to work for this device I was even trying wipe it by press volume up and power button
It shown only three options and no factory reset option there,
Not only that I want to flash it completely and I discover that it only make connection sound no effect, and I have installed the driver, and before it even connect to the image loader that I want to use, it show battery percent. So I don't know what to do now .
what is wrong with the phone in question?
what options do you have in recovery mode?
to flash, you must boot the phone into edl mode; refer to https://www.hovatek.com/forum/thread-23298.html
(15-04-2019, 02:33 PM)isyrecord It connected but
This is error I came across after bridged the two dot
Download Fail:FireHose Fail:FHLoader Failrocess fail