[lazarosimya]

I got TECNO W3 i flash it with wrong firmware i try too many times but it fail to read download or write or format i use more than ten firmwares nothing came out i try using sp flash tool with advanved mode nothng came out again it keeps telling me the images does not match what should i do i need you people to help me with this

Sent from my SM-G570F using Hovatek Mobile

[Joseph benitez]

Can it detect by PC, and send the build # of the phone

Sent from my Vivo XL3 Plus using Tapatalk

[lazarosimya]

Yah it detected when i connect it

Sent from my SM-G570F using Hovatek Mobile

[X3non]

Yah it detected when i connect it

Sent from my SM-G570F using Hovatek Mobile

when you flashed with wrong firmware, was the flashing process successful?
did you take note of the build number of your W3 before you flashed this wrong firmware?
whats the current state of the phone now? [totally dead, stuck at boot]
also attach a screenshot of any error you encounter while trying to flash

[EMMANUS]

Tecno W3 is one hard nut to crack. To save everybody time, you have to open the phone to check whats written on the board. Send us pics of board to help you verify.

[lazarosimya]

Can it detect by PC, and send the build # of the phone

Sent from my Vivo XL3 Plus using Tapatalk

[hovatek]

.

empty response

[lazarosimya]

Yah it detected when i connect it

Sent from my SM-G570F using Hovatek Mobile

when you flashed with wrong firmware, was the flashing process successful?
did you take note of the build number of your W3 before you flashed this wrong firmware?
whats the current state of the phone now? [totally dead, stuck at boot]
also attach a screenshot of any error you encounter while trying to flash

[lazarosimya]

It keeps shows brom error on sp flash tool and i fail to attach the screen shot i do not know how to attach

[EMMANUS]

Post the pictures to any site, then share the link here