[Community] Itel A11 & A12 _REPARTTITION_ error fix
[Community] Itel A11 & A12 _REPARTTITION_ error fix
20-07-2018, 05:01 PM
(20-07-2018, 01:56 PM)EMMANUS(20-07-2018, 01:52 PM)EMMANUS Yes, factory download tool http://www.mediafire.com/file/n5e7undeqs...L+TOOL.zip
The tool in that link and the tool from 9ja rom
which rom did you use for the a12?
04-01-2019, 10:44 AM
The tool will prompt you to unplug and enter download mode twice. What you have to do is, unplug your device, remove the battery, wait 30secs, insert battery, hold boot key, and plug back the phone.
10-03-2019, 12:50 PM
I happened to find the same itel A12 yesterday with no service issue. I remembered the A12 thats hangs on Logo and i extracted NV and flashed into the one thats No Service with CM2. After this fix i dumped firmware because it is same build number 100%.
When i flash to Hang on logo CM2 got stuck at 72%. Now im back to square 1
10-03-2019, 01:37 PM
(10-03-2019, 12:50 PM)JIJO Hi guys
I happened to find the same itel A12 yesterday with no service issue. I remembered the A12 thats hangs on Logo and i extracted NV and flashed into the one thats No Service with CM2. After this fix i dumped firmware because it is same build number 100%.
When i flash to Hang on logo CM2 got stuck at 72%. Now im back to square 1
use the factory download tool.. one thing you should sometimes the flash box fails to flash A11 OR A12 here is a link for the tool
https://www.hovatek.com/forum/thread-15611.html
This post was last modified: 11-03-2019, 10:43 AM by X3non.
12-03-2019, 07:14 AM
(10-03-2019, 12:50 PM)JIJO Hi guys
I happened to find the same itel A12 yesterday with no service issue. I remembered the A12 thats hangs on Logo and i extracted NV and flashed into the one thats No Service with CM2. After this fix i dumped firmware because it is same build number 100%.
When i flash to Hang on logo CM2 got stuck at 72%. Now im back to square 1
Try factory resetting the phone in recovery mode. See https://www.hovatek.com/forum/thread-479.html for how to enter received recovery.
Sent from my M5 mini using Hovatek Mobile
12-03-2019, 10:38 AM
(10-03-2019, 01:37 PM)Cfumpa(10-03-2019, 12:50 PM)JIJO Hi guys
I happened to find the same itel A12 yesterday with no service issue. I remembered the A12 thats hangs on Logo and i extracted NV and flashed into the one thats No Service with CM2. After this fix i dumped firmware because it is same build number 100%.
When i flash to Hang on logo CM2 got stuck at 72%. Now im back to square 1
use the factory download tool.. one thing you should sometimes the flash box fails to flash A11 OR A12 here is a link for the tool
https://www.hovatek.com/forum/thread-15611.html
12-03-2019, 10:49 AM
(12-03-2019, 10:38 AM)JIJO ...
blank reply
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
