[Please help] Miracle Tool Flashing Error
[Please help] Miracle Tool Flashing Error
06-09-2017, 05:03 PM
(14-08-2017, 08:31 AM)hovatek(13-08-2017, 04:38 AM)elegant_12 google drive link of screenshot, if not better in above comment.
Sent from my Moto E (4) using Hovatek Forum
This is usually an indication of a corrupted emmc chip.
Is the phone currently bricked or working perfectly.
BTW, version 2.27a often encounters issues with newer chips like MT67xx
is there any way to resolve this problem.
should i have to change the miracle tool to a different version?
And sometimes i get "boot: data_error2"
when dumping firmware through miracle.
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 10:30 AM
(06-09-2017, 05:03 PM)elegant_12 And sometimes i get "boot: data_error2"
Sent from my Moto E (4) using Hovatek Forum
That happens. You just need to retry
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
07-09-2017, 10:31 AM
(07-09-2017, 10:30 AM)hovatek(06-09-2017, 05:03 PM)elegant_12 And sometimes i get "boot: data_error2"
Sent from my Moto E (4) using Hovatek Forum
That happens. You just need to retry
i solved this problem...
is there any way to solve "Error1: no 5A"
my device is working well.
The problem is miracle can read but can't write [emoji21]
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 10:37 AM
(07-09-2017, 10:31 AM)elegant_12 i solved this problem...
is there any way to solve "Error1: no 5A"
my device is working well.
The problem is miracle can read but can't write [emoji21]
Sent from my Moto E (4) using Hovatek Forum
For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
07-09-2017, 10:38 AM
(07-09-2017, 10:37 AM)hovatek(07-09-2017, 10:31 AM)elegant_12 i solved this problem...
is there any way to solve "Error1: no 5A"
my device is working well.
The problem is miracle can read but can't write [emoji21]
Sent from my Moto E (4) using Hovatek Forum
For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 04:16 PM
(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
07-09-2017, 04:33 PM
(07-09-2017, 04:16 PM)X3nonpreloader & pgpt partition begin and end error when trying to flash firmware with sp flash tool and i can't figure out this problem. Any help from your side(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 04:37 PM
(07-09-2017, 04:16 PM)X3nonpreloader & pgpt partition begin and end error when trying to flash firmware with sp flash tool and i can't figure out this problem. Any help from your side(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
(07-09-2017, 04:33 PM)elegant_12(07-09-2017, 04:16 PM)X3nonpreloader & pgpt partition begin and end error when trying to flash firmware with sp flash tool and i can't figure out this problem. i dump firmware with miracle tool.Any help from your side(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
Sent from my Moto E (4) using Hovatek Forum
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 04:37 PM
(07-09-2017, 04:16 PM)X3nonpreloader & pgpt partition begin and end error when trying to flash firmware with sp flash tool and i can't figure out this problem. Any help from your side(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
(07-09-2017, 04:33 PM)elegant_12(07-09-2017, 04:16 PM)X3nonpreloader & pgpt partition begin and end error when trying to flash firmware with sp flash tool and i can't figure out this problem. i dump firmware with miracle tool.Any help from your side(07-09-2017, 10:38 AM)elegant_12 For the Error1: no 5A , its commonly associated with emmc chip problems.
Try ticking the Format option when flashing in Miracle Box.
BTW, was this miracle dump made from a working phone or this same one?
made from a working phone.
Moto E4 Mediatek variant
MT6737M.
Sent from my Moto E (4) using Hovatek Forum
i hope you are also aware that the miracle box v2.27 is an old version and doesnt fully support mt6737
that might as well be the reason for this error. have you tried flashing this dump you made using SP flash tool?
Sent from my Moto E (4) using Hovatek Forum
Sent from my Moto E (4) using Hovatek Forum
07-09-2017, 05:54 PM
" Error: no patti "
someone said i need to flash preloader along with any file.
is it ture.
Sent from my Moto E (4) using Hovatek Forum
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
