[Tutorial] How to boot into DnX mode on dual OS tablets
[Tutorial] How to boot into DnX mode on dual OS tablets
03-05-2017, 02:58 PM
In order to flash an Intel based Dual OS Tablet (Android + Windows), you need to boot it into DnX Mode. To do this:
- Power off the tablet
- Press the Volume down / decrease button and keep holding
- Press the Volume up / increase button and keep holding (you should now be holding both Volume up + down buttons)
- Press the Power button and keep holding (you should now be holding Volume up + Volume down + Power)
- Keep holding the three buttons till the phone enters DnX mode (it looks like the image below) then release
![[Image: Hovatek-How-to-boot-a-Dual-OS-tablet-and...X-mode.jpg]](https://www.hovatek.com/blog/bpyeki/uploads/2017/05/Hovatek-How-to-boot-a-Dual-OS-tablet-android-windows-into-DnX-mode.jpg)
This post was last modified: 10-06-2018, 10:24 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
