[Please help] Flashing errors-alcatel onetouch pop c5 5037x
[Please help] Flashing errors-alcatel onetouch pop c5 5037x
27-12-2017, 10:03 AM
(06-03-2017, 09:03 AM)hovatek(04-03-2017, 07:46 PM)iqra I tried to flash my alcatel onetouch pop c5 5037x using
sp flash tool v5.1612
the whole firmware is downloaded from firmwarefile.com
At first, I launch the flash tool, select scatter file and use "download only" (with all the files in the firmware folder checked). I get an error "PMT changed for the room it must be downloaded"
After that I use the "format" tab and format the phone using the default options.
then I again try to flash using "download only" but now getting an error
"BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (0x3f3)
I use Format+download and firware upgrade but still no luck.
when using latest sp flash tool v5.1648 error is "BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (0x3f3)
While with sp flash tool the error is "BROM ERROR: S_NOT_ENOUGH_STORAGE_SPACE (1011)
your help is highly appreciable.
regards.
That's a preloader (software) / emmc (hardware) level issue
1. Can you get access to a working phone of the same model?
2. Have you tried using a different firmware
3. How did the phone get bricked in the first place?
(06-03-2017, 05:47 PM)iqra(06-03-2017, 05:11 PM)hovatek Can I see a screenshot showing the content of the firmware folder you have
Indicate which one you were able to successfully flash
MT6572_Android_scatter.txt is the file which originally comes with all the .bin files and gives "BROM ERROR: s_not_enough_storage"
I replaced the scatter file with MT6572_Android_scatter_emmc.txt and used the previous .bin files and flash successful but ony logo and recovery can be seen.
And now I edit MT6572_Android_scatter.txt using notepad ++ by comparing the both scatter files using scatter analyzer. I delete some of the un necessary partitions (EBR2, CUSTPACK,MOBILE_INGO) since i donot have their .bins in the firmware. By deleting the scatter file has been easily flashed but again only logo..
I am confused between
when I format my whole phone (format with flash option) then after that what is important recovery.img or recovery.bin because I noticed if i flash recovery.bin only then I can get into recovery after flsah using power and vol+ key but not with the recovery.img.
Also system.img or system.bin
boot.img or bootimg.bin?
ps:
1.png is when i get first successfu flash
2. all the .img and .bins and scatterfiles
Hi,
I manage to flash my phone by using your scatter emmc file and the phone can swithch ON but it stuck at Alcatel logo.
My phone info as below and I attach snapshot the files and Stock ROM files.
Alcatel One Touch Pop C5 5037X
TCT Mobile Limited
5037X - 2ADHMY1
Firmware Version : Android 4.2.2
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V1.F1.P24
Kindly advise me what should I do and how to resolve this problem.
Regards,
My email address : askulbemmer@gmail.com
Attached Files
27-12-2017, 10:31 AM
(27-12-2017, 10:03 AM)madi.karlos Hi,
I manage to flash my phone by using your scatter emmc file and the phone can swithch ON but it stuck at Alcatel logo.
My phone info as below and I attach snapshot the files and Stock ROM files.
Alcatel One Touch Pop C5 5037X
TCT Mobile Limited
5037X - 2ADHMY1
Firmware Version : Android 4.2.2
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V1.F1.P24
Kindly advise me what should I do and how to resolve this problem.
Regards,
My email address : askulbemmer@gmail.com
Please, create a new thread, this is someone else's support thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
