[Tutorial] How to use Miracle Box to backup Unisoc / Spreadtrum (SPD) firmware
[Tutorial] How to use Miracle Box to backup Unisoc / Spreadtrum (SPD) firmware
09-06-2018, 03:19 AM
(09-06-2018, 12:36 AM)EngelP Hi, I'm using Miracle Crack new version 2.58, I'm following your instructions, but in my case the bar loads and starts reading is using the button (Vol. +) And not the (-), but when it reads and reaches the 100% is frozen there for a while and a "BootLoad Error ID: 1" error message appears. Help me with this?
Or should I use the Miracle 2.27 + Loader?
you can try that particular version but it doesn't guarantee your phone will be supported. if it doesn't then either use the latest version or try a different tool e.g cm2spd
11-06-2018, 10:28 PM
(12-12-2017, 07:12 AM)agustino I feel this is a little bit hackish because the tool used is unofficial and (at least in my case) requires changing time settings every time you want to use it and then reverting them back later which is quite cumbersome. My question is, isn't there an official tool that can do this without the need of a cracked tool?
12-06-2018, 11:25 PM
(11-06-2018, 10:28 PM)emerituskay ...
empty reply
This post was last modified: 12-06-2018, 11:25 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
02-02-2019, 11:03 AM
(02-02-2019, 03:35 AM)shankar1790 My cpu is not listed sc9832a, so sad ..
you need to use latest version along with the hardware dongle
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-03-2019, 11:02 AM
(03-03-2019, 02:20 PM)lexar21 miracle box all version is not working, everytime i click start button in spd it closes the program plz fix it
try another PC
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-03-2019, 03:13 PM
(04-03-2019, 02:58 PM)lexar21 after executing readinfo in my mtk device, the device is not opening, though it reads my device driver, but it cannot flash any firmware via spft nor the miracle. why is it happening? (sorry for my english)
disconnect/reconnect the phone's battery and you're good to go.
04-03-2019, 05:34 PM
(04-03-2019, 03:13 PM)innageebut it has a built in battery. i tried to long press the power button to force restart but still nothings happen(04-03-2019, 02:58 PM)lexar21 after executing readinfo in my mtk device, the device is not opening, though it reads my device driver, but it cannot flash any firmware via spft nor the miracle. why is it happening? (sorry for my english)
disconnect/reconnect the phone's battery and you're good to go.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
