|
HOW TO ROOT TECNO W3 LTE
|
30-01-2017, 02:18 PM
Please i won to try to root my tecno w3lte i have dump the firmware in scatter format, downloaded the TWRP for Tecno W3 LTE ported by Team Hovatek @ htt...0xLTg/view but still did not work my for build number is W3LTE-H356-D1-M-HiOS-20160705 thank ypu for your support
30-01-2017, 02:53 PM
Here the link to download my preloader.bin and scatter file And recovery.bin https://drive.google.com/open?id=0B84kLp...k8tMWFQTFU Thanks You
31-01-2017, 08:55 AM
(30-01-2017, 02:18 PM)ufos97 Wrote: Please i won to try to root my tecno w3lte i have dump the firmware in scatter format, downloaded the TWRP for Tecno W3 LTE ported by Team Hovatek @ htt...0xLTg/view but still did not work my for build number is W3LTE-H356-D1-M-HiOS-20160705 thank ypu for your support What problem did you have with the TWRP or guide @ https://www.hovatek.com/forum/thread-16647.html ?
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
31-01-2017, 09:27 AM
the Twrp did not work for me so please can you help me port TWRP for me i have already uploaded the link
31-01-2017, 08:27 PM
(31-01-2017, 09:27 AM)ufos97 Wrote: the Twrp did not work for me so please can you help me port TWRP for me i have already uploaded the link Please, could you be more specific about what you mean by 'did not work'? Details please
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
01-02-2017, 04:29 PM
I tried using sp flash tool to flash the twrp but it is showing Boom Error S_invalid_BB Chip_type (0x3eb)
01-02-2017, 04:53 PM
I just TRied Using Miracle box and it showed me
Waiting for USB Port... Set MediaTek PreLoader USB VCOM Port (COM28) Please Hold "ON" to connect with the phone... Connected to Phone. CPU: MT6735 SW:0000 Ver: CA00 Downloading Boot8 ... EMMC Size: 0x01D2000000 Flash Type: EMMC INT/EXT RAM Size: 0x0+0x0 Writing(Nand/eMMC)... >>Error set: patti
02-02-2017, 10:38 AM
(01-02-2017, 04:53 PM)ufos97 Wrote: I just TRied Using Miracle box and it showed me From your last 2 comments, I can tell that you're not following the rooting guide. The rooting guide is @ https://www.hovatek.com/forum/thread-16647.html , please, read and follow it
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
02-02-2017, 12:51 PM
I tried it again just now following the instruction on https://www.hovatek.com/forum/thread-16647.html But its still showing me the same error message Thats the message below
Welcome to use Miracle Box (World's First Fuzzy Logic Based Tool) Update:16-01-09 Connected OK. Fuzzy Logic Method is very safe and reliable ! Check Authentication... Check the new version. ______________________________ Miracle Box Version 2.42 Release: 21st Janurary 2017 ______________________________ www.support.amiraclebox.com Buy 1 year Support Activation BIG BIG UPDATES ON THE WAY Br. [SV] Miracle Team __________[FACEBOOK]__________ http://facebook.com/amiracleteam ___________SUPPORT]___________ http://forum.gsmhosting.com/vbb/f751 ______________________________ 1. Power Off Phone , Remove Battery, Insert Battery Back 2. Insert USB cable. In some cases Required Hold BootKey 3. Use Miracle Boot Key In cases Boot key not Find 4. Battery Should be Charged more then 50% Waiting for USB Port... Set MediaTek PreLoader USB VCOM Port (COM28) Please Hold "ON" to connect with the phone... Connected to Phone. CPU: MT6735 SW:0000 Ver: CA00 Downloading Boot8 ... EMMC Size: 0x01D2000000 Flash Type: EMMC INT/EXT RAM Size: 0x0+0x0 Writing(Nand/eMMC)... >>Error set: patti
02-02-2017, 05:49 PM
(02-02-2017, 12:51 PM)ufos97 Wrote: I tried it again just now following the instruction on https://www.hovatek.com/forum/thread-16647.html But its still showing me the same error message Thats the message below You're supposed to flash preloader.bin and recovery.bin together. You'll get >>Error set: patti when preloader.bin isn't included BTW, are you using the box with a hardware dongle?
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait. |
| Users browsing this thread: |
| 1 Guest(s) |
