21-12-2016, 07:43 PM
Did not connect at all, they said it trip off suddenly When using them and never on again please what can I do please
Sent from my TECNO-J5 using Hovatek mobile
Sent from my TECNO-J5 using Hovatek mobile
|
Tecno y2 and y6
|
21-12-2016, 08:46 PM
When you connect to pc, does it make a sound?
Sent from my TECNO W4 using Hovatek mobile
21-12-2016, 09:33 PM
No my boss
Sent from my TECNO-J5 using Hovatek mobile 
22-12-2016, 09:14 AM
(21-12-2016, 09:33 PM)isyrecord Wrote: No my boss Please, create a new thread for the Y6 to avoid a mixup. For the Y2, ensure to charge the battery externally. If that doesn't help then try gold points as described @ https://www.hovatek.com/forum/thread-11802.html
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
22-12-2016, 11:54 PM
Please Can this solution work for all MTK Phones I e Solder a thin wire to the GND point then join it to the KCOLO or solve my problem
Sent from my TECNO-J5 using Hovatek mobile
23-12-2016, 01:31 PM
(22-12-2016, 11:54 PM)isyrecord Wrote: Please Can this solution work for all MTK Phones I e Solder a thin wire to the GND point then join it to the KCOLO or solve my problem The points might vary but the technique does work
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
24-12-2016, 09:28 AM
Sir I try to Locate KCOLO on y2 and y6 I can’t get it please what can I do to revive these two Phones
Sent from my TECNO-J5 using Hovatek mobile
24-12-2016, 07:57 PM
Can you find DP,VBatt,DM and GND? Or Vchrg, rx, tx and gnd? If yes let me know the ones present
Sent from my TECNO W4 using Hovatek mobile |
| Users browsing this thread: |
| 1 Guest(s) |