How to unlock the Bootloader of the Tecno Phantom 6 Plus
How to unlock the Bootloader of the Tecno Phantom 6 Plus
05-12-2016, 02:46 PM
To successfully unlock the Bootloader of the Tecno Phantom 6 Plus :
* Backup your important stuff as unlocking the Bootloader wipes your data
* Enable USB Debugging on the Tecno Phantom 6 Plus (see https://www.hovatek.com/forum/thread-10109.html)
* Enable OEM Unlocking under Settings > Developer options
* Setup ADB and Fastboot on the PC (see https://www.hovatek.com/forum/thread-588.html)
* Connect the phone to the PC via USB cord (while On)
* Launch ADB
* In ADB, run the following command (press Enter after the command)
Code:
adb devices* ADB should detect the device. If ADB detects other devices but not the Tecno Phantom 6 Plus then it must be an ADB clash, see https://www.hovatek.com/forum/thread-10111.html
* Once the device gets detected, boot it into Fastboot by running the following command (press Enter after the command)
Code:
adb reboot-bootloader* The phone should now enter Fastboot (black screen with only fastboot written at the top or bottom)
* In Fastboot, run the following command (press Enter after the command)
Code:
fastboot oem unlock* You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes
* You should now get a success message
* Reboot the device by running the command below (press Enter after the command)
Code:
fastboot rebootIf you wish to root your Tecno Phantom 6 Plus after unlocking the Bootloader then follow the guide @ https://www.hovatek.com/forum/thread-16237.html
This post was last modified: 06-12-2016, 09:36 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
