31-07-2016, 08:33 AM
To successfully unlock the Bootloader of the Tecno Camon C9 or C9 Pro:
- Backup your important stuff as unlocking the Bootloader wipes your data
- Enable USB Debugging on the Tecno C9 (see https://www.hovatek.com/forum/thread-10109.html)
- Enable OEM Unlocking under Settings > Developer options
- Setup ADB and Fastboot on the PC (see https://www.hovatek.com/forum/thread-588.html)
- Connect the phone to the PC via USB cord (while On)
- Launch ADB
- In ADB, run the following command (press Enter after the command)
Code:adb devices
- ADB should detect the device. If ADB detects other devices but not the Tecno C9 or C9 Pro then it must be an ADB clash, see https://www.hovatek.com/forum/thread-10111.html
- Once the device gets detected, boot it into Fastboot by running the following command (press Enter after the command)
Code:adb reboot-bootloader
- The phone should now enter Fastboot (black screen with only fastboot written at the top or bottom)
- In Fastboot, run the following command (press Enter after the command)
Code:fastboot oem unlock
- You should get a prompt on the device asking you to confirm Bootloader unlock, press the volume up button for Yes
- You should now get a success message
- Reboot the device by running the command below (press Enter after the command)
Code:fastboot reboot
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.