[Tutorial] How to unlock Airtel Vida M2 LTE Mifi M022 / M022T
[Tutorial] How to unlock Airtel Vida M2 LTE Mifi M022 / M022T
07-07-2021, 04:09 AM
(06-07-2021, 02:11 PM)X3non(05-07-2021, 07:44 PM)w2ddle There was and i entered 123456 instead 12345..but still no signal.
oh yes, you're correct, it's 123456
(05-07-2021, 07:44 PM)w2ddle i've tried to re-flash using m022t firmware but now, it only has the battery icon lit up (wifi has no lights now) and still no signal.
the idea is to keep looking for and trying other firmwares
download this firmware @ http://www.mediafire.com/file/8p29j1wrdm...9.rar/file
here's what you'll try
try flashing the m022 firmware from page 1 but replace Skylark_L02I_1_10_20160705_lzma.bin with 10_RFBN_Globe_M022T_L02I_1_10_20170724_lzma.bin from the firmware in the link above then confirm signal reception
thanks for your continous help.. not sure if i done it correctly but i've manually added the RFN then flashed it. unfortunately, still showing red on the signal..
is there anyway to get a stock firmware from another pocket wifi then flashed it on my broken device? i have a friend who have same pocket wifi with stock firmware but not sure how to get it out and use it on my own.
Attached Files
07-07-2021, 02:08 PM
(07-07-2021, 04:09 AM)w2ddle ...
thanks for your continous help.. not sure if i done it correctly but i've manually added the RFN then flashed it. unfortunately, still showing red on the signal..
you need to be sure that you did this correctly, also you need to test signal reception using globe sim too
for replacing the file, you can simply rename the file from "10_RFBN_Globe_M022T_L02I_1_10_20170724_lzma.bin" to "Skylark_L02I_1_10_20160705_lzma.bin"
then copy and paste it into the same folder, thereby replacing the existing file
(07-07-2021, 04:09 AM)w2ddle is there anyway to get a stock firmware from another pocket wifi then flashed it on my broken device?...
not that i am aware of, but now you mention it. there might be a way though (you could try this out first using your own device)
when you launch SWD > load the blf file > click Upload > Upload areas configuration
it'll open a new window > click add area (you'll need to add area for all 11 partitions one after the other)
if you've added area for all 11 partitions then click GO in upload areas config window
Below are the values for "add area window"
Offset = Image_Flash_Entry_Address
Datasize = Image_Erase_Size
Partition = 0
tick the checkbox for Uploaddata with spare area
upload data to file = you can select an empty folder and give it a filename e.g 1.bin to 11.bin (for each of the 11 partitions)
i've added the offset and datasize below (add gotten from the blf file)
Code:
1_Image_Flash_Entry_Address = 0x00000000
1_Image_Erase_Size = 0x6000
2_Image_Flash_Entry_Address = 0x00006000
2_Image_Erase_Size = 0x1A000
3_Image_Flash_Entry_Address = 0x00020000
3_Image_Erase_Size = 0x00020000
4_Image_Flash_Entry_Address = 0x00040000
4_Image_Erase_Size = 0x00020000
5_Image_Flash_Entry_Address = 0x00060000
5_Image_Erase_Size = 0x00460000
6_Image_Flash_Entry_Address = 0x004C0000
6_Image_Erase_Size = 0x000C0000
7_Image_Flash_Entry_Address = 0x00580000
7_Image_Erase_Size = 0x001E0000
8_Image_Flash_Entry_Address = 0x00760000
8_Image_Erase_Size = 0x00080000
9_Image_Flash_Entry_Address = 0x007E0000
9_Image_Erase_Size = 0x00060000
10_Image_Flash_Entry_Address = 0x00840000
10_Image_Erase_Size = 0x00010000
11_Image_Flash_Entry_Address = 0x00A00000
11_Image_Erase_Size = 0x00020000Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
09-07-2021, 07:19 PM
(07-07-2021, 02:08 PM)X3non(07-07-2021, 04:09 AM)w2ddle ...
thanks for your continous help.. not sure if i done it correctly but i've manually added the RFN then flashed it. unfortunately, still showing red on the signal..
you need to be sure that you did this correctly, also you need to test signal reception using globe sim too
for replacing the file, you can simply rename the file from "10_RFBN_Globe_M022T_L02I_1_10_20170724_lzma.bin" to "Skylark_L02I_1_10_20160705_lzma.bin"
then copy and paste it into the same folder, thereby replacing the existing file
(07-07-2021, 04:09 AM)w2ddle is there anyway to get a stock firmware from another pocket wifi then flashed it on my broken device?...
not that i am aware of, but now you mention it. there might be a way though (you could try this out first using your own device)
when you launch SWD > load the blf file > click Upload > Upload areas configuration
it'll open a new window > click add area (you'll need to add area for all 11 partitions one after the other)
if you've added area for all 11 partitions then click GO in upload areas config window
Below are the values for "add area window"
Offset = Image_Flash_Entry_Address
Datasize = Image_Erase_Size
Partition = 0
tick the checkbox for Uploaddata with spare area
upload data to file = you can select an empty folder and give it a filename e.g 1.bin to 11.bin (for each of the 11 partitions)
i've added the offset and datasize below (add gotten from the blf file)
Code:1_Image_Flash_Entry_Address = 0x00000000 1_Image_Erase_Size = 0x6000 2_Image_Flash_Entry_Address = 0x00006000 2_Image_Erase_Size = 0x1A000 3_Image_Flash_Entry_Address = 0x00020000 3_Image_Erase_Size = 0x00020000 4_Image_Flash_Entry_Address = 0x00040000 4_Image_Erase_Size = 0x00020000 5_Image_Flash_Entry_Address = 0x00060000 5_Image_Erase_Size = 0x00460000 6_Image_Flash_Entry_Address = 0x004C0000 6_Image_Erase_Size = 0x000C0000 7_Image_Flash_Entry_Address = 0x00580000 7_Image_Erase_Size = 0x001E0000 8_Image_Flash_Entry_Address = 0x00760000 8_Image_Erase_Size = 0x00080000 9_Image_Flash_Entry_Address = 0x007E0000 9_Image_Erase_Size = 0x00060000 10_Image_Flash_Entry_Address = 0x00840000 10_Image_Erase_Size = 0x00010000 11_Image_Flash_Entry_Address = 0x00A00000 11_Image_Erase_Size = 0x00020000
Tried the steps/instruction provided but still no signal
10-07-2021, 09:01 AM
(09-07-2021, 07:19 PM)w2ddle Tried the steps/instruction provided but still no signal
where you able to backup from the second device?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
11-07-2021, 03:15 AM
(10-07-2021, 09:01 AM)X3non(09-07-2021, 07:19 PM)w2ddle Tried the steps/instruction provided but still no signal
where you able to backup from the second device?
unfortunately no, not yet.. i'm still trying to figure out the steps you've provided and as i dont want to mess this up (again) the 2nd m022 device from my friend lol
This post was last modified: 11-07-2021, 07:11 AM by w2ddle.
12-07-2021, 09:56 AM
(11-07-2021, 03:15 AM)w2ddle unfortunately no, not yet.. i'm still trying to figure out the steps you've provided and as i dont want to mess this up (again) the 2nd m022 device from my friend lol
this is the reason i mentioned to try the backup first on your own device and if successful, you can always verify the contents of the backup against the firmware you flashed before taking the backup
if you still have problems then create a new thread for the issue and point out where you got stuck
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-07-2021, 07:55 PM
Attached Files
16-07-2021, 10:09 AM
(15-07-2021, 07:55 PM)Andztan please help, teacher, here I want to flash my airtel modem with a firmware that is colored like this. but I'm confused where to get it. The firmware is like the picture I uploaded or maybe this file? L02HAirtel2_NGR_Color_LCD_LD_V006
create a new thread for this by clicking "ask question" at the top
in the new thread, explain what exactly is wrong with your device
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
