B315s-22 Dead Problem
B315s-22 Dead Problem
04-05-2022, 05:00 PM
Hello,
I have flashed a B315s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :
1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.
2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.
3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.
4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.
If i reset power form router it starts in emergency mode again with no leds as stated above.
I would really appreicate if anyone with experience or insight to help out.
Regards
04-05-2022, 05:02 PM
I have flashed a B315s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :
1. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.
If i reset power form router it starts in emergency mode again with no leds as stated above.
I would really appreicate if anyone with experience or insight to help out.
Regards
This post was last modified: 04-05-2022, 05:03 PM by osama_momani0.
05-05-2022, 12:23 AM
I have flashed a B315s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :
1. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.
If i reset power form router it starts in emergency mode again with no leds as stated above.
I would really appreicate if anyone with experience or insight to help out.
Regards
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)