Gionee GN8003 Dead after Unlocking Bootloader
Gionee GN8003 Dead after Unlocking Bootloader
(12-09-2020, 06:14 PM)X3non(12-09-2020, 01:48 PM)Iken99 The gionee m6 GN8003 is different from other m6 i could have uploaded the flashtool, ROM, DA and auth file but i no too get data. Everything is roughly 12gb, first u need to flash the signed chinese rom to wake the phone after that unlock the bootloader and the the global rom that contains gapps. Remember the global rom alone might not wake the phone now that its dead you'll need the Signed Chinese ROM WITH CERTIFACATE.
@iKEN99 the build number is M6 GN8003_MT6755_BBL%15A_T0115
I there a way you can share me with the link where you downloaded the flash flies you used to restore your device when it went dead ?
(11-09-2020, 07:59 PM)Iken99(11-09-2020, 10:53 AM)MrDonDero it just wont boot up. tried flashing with SP flash tool got an error.
Had to downlaod DA/AUTH file to flash but non of the flashing tools i tired is working
Current state of the phone is DEAD but has an active proloader(PC CAN DETECT THE PHONE)
Please what can i do now
i had the same issue some time ago, currently using the same phone, those chinese variants are stubborn and have their own signed tools and firmwares, if you are still having problems chat/call me
(12-09-2020, 01:54 PM)Iken99(12-09-2020, 01:48 PM)Iken99 The gionee m6 GN8003 is different from other m6 i could have uploaded the flashtool, ROM, DA and auth file but i no too get data. Everything is roughly 12gb, first u need to flash the signed chinese rom to wake the phone after that unlock the bootloader and then flash the Rom that contains gapps. later fix imei and radio etc, Remember the global rom alone might not wake the phone now that its dead you'll need the Signed Chinese ROM WITH CERTIFACATE.
@IKEN99 ...Please share the download links
(13-09-2020, 03:43 PM)MrDonDero(11-09-2020, 07:59 PM)Iken99(11-09-2020, 10:53 AM)MrDonDero it just wont boot up. tried flashing with SP flash tool got an error.
Had to downlaod DA/AUTH file to flash but non of the flashing tools i tired is working
Current state of the phone is DEAD but has an active proloader(PC CAN DETECT THE PHONE)
Please what can i do now
i had the same issue some time ago, currently using the same phone, those chinese variants are stubborn and have their own signed tools and firmwares, if you are still having problems chat/call me
Kindly provide your contact or chat me up with 07015022415 thanks
(12-09-2020, 12:34 PM)hovatek(09-09-2020, 04:32 PM)MrDonDero Dear Hovatek,
My Gionee M6 GN8003 is dead after i tried to unlock bootloader , unlocking done was waiting for phone to reboot but it didnt reboot.
My Gionne M6 GN8003 can still be detected by PC but when i try to full flash with SP flash tool i get and error saying AUTH error. 4
Have downloaded the DA/AUTH from you guys but still cant flash with SP flash tool
Kindly help
1. Shed some light on the steps you took to unlock bootloader and everything that happened up until it went totally dead.
2. How many M6 builds @ https://www.hovatek.com/forum/thread-389.html have you flashed so far? Tried the Gionee M6 MT6755_amigo3.5.0_20170307_191619 (Systemless) yet?
MY ANSWER
@question 1 Ran CMD as an admin and used the command instruct using fastboot to unlock the bootloader, unlocking was successful then immediately i rebooted the phone went off
@question 2 i have not tried that firmware let me see whether i can download and try then i will reply to the thread with situation
(13-09-2020, 03:54 PM)MrDonDero(12-09-2020, 12:34 PM)hovatek(09-09-2020, 04:32 PM)MrDonDero Dear Hovatek,
My Gionee M6 GN8003 is dead after i tried to unlock bootloader , unlocking done was waiting for phone to reboot but it didnt reboot.
My Gionne M6 GN8003 can still be detected by PC but when i try to full flash with SP flash tool i get and error saying AUTH error. 4
Have downloaded the DA/AUTH from you guys but still cant flash with SP flash tool
Kindly help
1. Shed some light on the steps you took to unlock bootloader and everything that happened up until it went totally dead.
2. How many M6 builds @ https://www.hovatek.com/forum/thread-389.html have you flashed so far? Tried the Gionee M6 MT6755_amigo3.5.0_20170307_191619 (Systemless) yet?
MY ANSWER
@question 1 Ran CMD as an admin and used the command instruct using fastboot to unlock the bootloader, unlocking was successful then immediately i rebooted the phone went off
@question 2 i have not tried that firmware let me see whether i can download and try then i will reply to the thread with situation
UPDATE !!!!
Just tried the amigo3.5.0 systemless file still DID NOT WORK with SP flash tool and GN_MTK_MPKey_SP_Downlaod tool (BROM ERROR: s_brom_cmd_startcmd_fail -x7D5)
that's the error i get
(12-09-2020, 07:35 PM)Iken99 Yes, i think so.
(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links
(14-09-2020, 10:28 AM)X3non(12-09-2020, 07:35 PM)Iken99 Yes, i think so.
thanks for verifying...
(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links
we've just added a link to the firmware @iken99 verified as the chinese firmware
check for the build number BBL7515A_sign_T0158 @ https://www.hovatek.com/forum/thread-389.html
UPDATE!!!
The Chinese link is questing me to create an account before i can download
is there any other link to download the SIGNED file
(14-09-2020, 11:07 AM)MrDonDero UPDATE!!!
The Chinese link is questing me to create an account before i can download
is there any other link to download the SIGNED file
(14-09-2020, 10:28 AM)X3non(12-09-2020, 07:35 PM)Iken99 Yes, i think so.
thanks for verifying...
(13-09-2020, 03:47 PM)MrDonDero @IKEN99 ...Please share the download links
we've just added a link to the firmware @iken99 verified as the chinese firmware
check for the build number BBL7515A_sign_T0158 @ https://www.hovatek.com/forum/thread-389.html