[Please help] fimware alcatel 4047x u5 3g
[Please help] fimware alcatel 4047x u5 3g
(19-12-2018, 09:31 PM)vobbogay One step forward scatter file load with no errors - i'm happy, but then got a mes.
"Download DA 100%" on red field, and nothing happened, was waiting over 40 min
unhappy again
(20-12-2018, 02:36 PM)hovatek(19-12-2018, 09:31 PM)vobbogay One step forward scatter file load with no errors - i'm happy, but then got a mes.
"Download DA 100%" on red field, and nothing happened, was waiting over 40 min
unhappy again
Its a miracle box backup isn't it? Why not flash back using miracle box instead of sp flash tool?
I wrote about it beore, but...
here you're mes. from log :
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek USB Port (COM3)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
The Boot not support the Phone, or CPU Bad. Select other Boot.
Not Write EEP, not change SN and RF data
System Info:
id:010 02
version:7.0
model:4047X
brand:TCL
manufacturer:TCL
that's why
(20-12-2018, 07:07 AM)EMMANUS Try other versions of SP ft.
Then, you can also try nck mtk tool.
(20-12-2018, 03:29 PM)vobbogay ...
SP 5.1752 - ERROR_S_AUTH_HANDLEIS_NOT_READY(5000) SECURE BASE BAND CHIP.....
SP 5.1824 - SAME AS ABOVE
SP 5.1524 - AS ABOVE
SP 5.1728 - AS ABOVE ................
SP 5.1836 - BOUNDARY CHECK FAIL.........
SP 5.1648 - DA DOWNLOAD 100% - ...AND STIIL...............
...
(21-12-2018, 11:35 AM)X3non(20-12-2018, 03:29 PM)vobbogay ...
SP 5.1752 - ERROR_S_AUTH_HANDLEIS_NOT_READY(5000) SECURE BASE BAND CHIP.....
SP 5.1824 - SAME AS ABOVE
SP 5.1524 - AS ABOVE
SP 5.1728 - AS ABOVE ................
SP 5.1836 - BOUNDARY CHECK FAIL.........
SP 5.1648 - DA DOWNLOAD 100% - ...AND STIIL...............
...
SP 5.1836
try this fix at https://www.hovatek.com/forum/thread-24287.html lets know if it changes anything
SP 5.1648
is there any error message or it just stops there?
try flashing without holding any buttons
try flashing while holding vol down button before connecting the phone
SP 5.1532
did you try this version?
(21-12-2018, 07:50 PM)vobbogay(21-12-2018, 11:35 AM)X3non(20-12-2018, 03:29 PM)vobbogay ...
SP 5.1752 - ERROR_S_AUTH_HANDLEIS_NOT_READY(5000) SECURE BASE BAND CHIP.....
SP 5.1824 - SAME AS ABOVE
SP 5.1524 - AS ABOVE
SP 5.1728 - AS ABOVE ................
SP 5.1836 - BOUNDARY CHECK FAIL.........
SP 5.1648 - DA DOWNLOAD 100% - ...AND STIIL...............
...
SP 5.1836
try this fix at https://www.hovatek.com/forum/thread-24287.html lets know if it changes anything
SP 5.1648
is there any error message or it just stops there?
try flashing without holding any buttons
try flashing while holding vol down button before connecting the phone
SP 5.1532
did you try this version?
ok. by the numbers:
-SP 5.1836 - i used this thread before but it seems to be working only with SP 5.1648 (for now), and this is the only ver. with no ERROR (5000), means no needs auth file
-SP 5.1648 - no error mes. just "DA download 100%" on the red progress bar, then still, more than 2H.
Never hold any buttons before, it wasn't necessary, but i'll (no hope)
-SP 5.1532 - i did, error (5000) or boundary check fail,don't remember exact, i can't find linux ver. and my win is totally mess (as usually) so i won't dare to power it up only reinstal..
I think the problem is in it :
SP -" SECURE BASE BAND CHIP"
NCK MTK TOOL -"BBCHIP
[AUTH]Wrong model selected, , please check!!!
Boot Fail.!!!."
MB-"Downloading Boot8 ...
The Boot not support the Phone, or CPU Bad. Select other Boot."
... and haven't any idea how solve this problem by myself, do You ?
Do U know SP_Flash_Tool_v3.1320.0.174_Secboot ?
some more info :
under Lin - recognize chip, and phone as MediaTek modem (Kali2018.4 or Mint19.x)
VMvare(Win10P under Lin) as well
under Win - recognize chip, but dev. is connecting and disconnecting and reconnecting again every few mins (Win10P),and i'm sure the drivers installed were correct ,means the Dev. worked right before i bricked it to die.Before it, i bricked and unbricked it few times by the MB or Mobile Upgrade S Gotu2 v5.2.4, it takes about 25 mins.
Are U sure SP 5.1532 working with MT6580 chip ?
(21-12-2018, 07:50 PM)vobbogay ok. by the numbers:
-SP 5.1836 - i used this thread before but it seems to be working only on SP 5.1648 (for now), and this is the only ver. with no ERROR
...
(22-12-2018, 01:22 PM)X3non(21-12-2018, 07:50 PM)vobbogay ok. by the numbers:
-SP 5.1836 - i used this thread before but it seems to be working only on SP 5.1648 (for now), and this is the only ver. with no ERROR
...
i sent you a PM
BTW which version of miracle box did you used to backup firmware from this device?
(24-12-2018, 10:43 AM)X3non(22-12-2018, 08:51 PM)vobbogay MB 2.58
search the folder of this MB version for any DA file, if it contains any da file then try using the da file in spft