Tecno M7 SP Flash Tools Brom Error 0x8
Tecno M7 SP Flash Tools Brom Error 0x8
(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
(17-06-2017, 11:02 AM)Degereji(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
what mode did you use?
Download only
Firmware Upgrade
Format all and Download
?
?
(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
(17-06-2017, 01:39 PM)innagee(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
Both variant 1 and 2 links are working good. Recheck.
Also, for flashing interrupted see https://www.hovatek.com/forum/thread-808.html
(17-06-2017, 11:11 AM)erhiskobi(17-06-2017, 11:02 AM)Degereji(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
what mode did you use?
Download only
Firmware Upgrade
Format all and Download
?
?
Download only
Sent from my Infinix-X600-LTE using Hovatek mobile
(17-06-2017, 03:11 PM)Degereji(17-06-2017, 11:11 AM)erhiskobi(17-06-2017, 11:02 AM)Degereji(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
what mode did you use?
Download only
Firmware Upgrade
Format all and Download
?
?
Download only
Sent from my Infinix-X600-LTE using Hovatek mobile
try flash the other variant after downloading it....if it also shows same error you should try "format all and download" option
Goodluck!
(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
(17-06-2017, 05:35 PM)erhiskobi(17-06-2017, 03:11 PM)Degereji(17-06-2017, 11:11 AM)erhiskobi(17-06-2017, 11:02 AM)Degereji(17-06-2017, 10:54 AM)erhiskobi Hello I am trying to flash a dead tecno m7 and I get that above error on sp flash tool (wiselink also).
The phone got dead after a previous flashing process got stuck at 50%. The phone is still being detected by pc.
I looked the issue up on Hovatek forum and I got this as fix:
Error 0x8
Message: BROM ERROR: ?? (0x8)
Meaning: The size of a file is larger than the available / possible partition size
Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
* Change the phone's emmc chip
* Try using a different PC.
I downloaded the stock ROM (backup) on Hovatek forum (variant 2) and flashed with it and I got that Error. I tried downloading the other ROM (variant 1) but the link is bad.
I also downloaded m7 ROM from other sites and also got the same error.
Please any idea how to go about it?
Sent from my Infinix-X600-LTE using Hovatek mobile
what mode did you use?
Download only
Firmware Upgrade
Format all and Download
?
?
Download only
Sent from my Infinix-X600-LTE using Hovatek mobile
try flash the other variant after downloading it....if it also shows same error you should try "format all and download" option
Goodluck!
The link to variant 1 is broken. Plus I've used format + download all. Didn't work either
Sent from my Infinix-X600-LTE using Hovatek mobile