Tecno F1 Stuck on Fast Boot Mode

61

22-11-2019, 04:09 PM

#1

Hello There,
I have a Tecno F1 Stucked on Fast boot mode I tried Hold Power Button With Nothing on the end, I tried to remove the Battery, i tried adb and Fast Boot, I tried Android Multtools with no succeed at all, i try to read the phone info but it goes no where just display these message
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM4)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
>>Downloading Boot8 ...

Then nothing the start button reappear. is there solution to this Problem?

xerxes
Senior Member

8,357

22-11-2019, 06:45 PM

#2

(22-11-2019, 04:09 PM)davidmalambika Hello There,
I have a Tecno F1 Stucked on Fast boot mode I tried Hold Power Button With Nothing on the end, I tried to remove the Battery, i tried adb and Fast Boot, I tried Android Multtools with no succeed at all, i try to read the phone info but it goes no where just display these message
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM4)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
>>Downloading Boot8 ...

Then nothing the start button reappear. is there solution to this Problem?

Have you tried “fastboot reboot” command on pc to exit fastboot?
You’ll need to load the phone’s DA before operation on flash tools. Download DA for F1 @ https://www.hovatek.com/forum/thread-23243.html and load to Miracle before reading info.

This post was last modified: 22-11-2019, 06:45 PM by xerxes.

X3non
Recognized Contributor

22,062

23-11-2019, 11:33 AM

#3

(22-11-2019, 04:09 PM)davidmalambika Hello There,
I have a Tecno F1 Stucked on Fast boot mode I tried Hold Power Button With Nothing on the end, I tried to remove the Battery, i tried adb and Fast Boot, I tried Android Multtools with no succeed at all, i try to read the phone info but it goes no where just display these message
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM4)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
>>Downloading Boot8 ...

Then nothing the start button reappear. is there solution to this Problem?

try the fixes @ https://www.hovatek.com/forum/thread-20135.html
if none helps then download and flash factory firmware for your build number @ https://www.hovatek.com/forum/thread-26041.html

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions