[Tutorial] please help me on how to change an innjoo halo imei number
[Tutorial] please help me on how to change an innjoo halo imei number
(24-10-2015, 06:11 AM)muhammed4u admin, please help me on how to change my innjoo halo imei number, it is already rooted.
(24-10-2015, 04:01 PM)X3nonthanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.(24-10-2015, 06:11 AM)muhammed4u admin, please help me on how to change my innjoo halo imei number, it is already rooted.
* Download and Install Mobile Uncle then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information
At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"
At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"
* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below
Code:
AT+ EGMR=The rest of the code
(25-10-2015, 09:14 AM)muhammed4u(24-10-2015, 04:01 PM)X3nonthanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.(24-10-2015, 06:11 AM)muhammed4u admin, please help me on how to change my innjoo halo imei number, it is already rooted.
* Download and Install Mobile Uncle then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information
At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"
At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"
* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below
Code:
AT+ EGMR=The rest of the code
(25-10-2015, 10:02 AM)Omegaohmsso spreadtrum cannot change imei no?(25-10-2015, 09:14 AM)muhammed4u(24-10-2015, 04:01 PM)X3nonthanks very much, i appreciate u. But i hv tried this step doesnt work. when selecting "engineerig mode" it toast me with this "engineering mode is not avalable". even i tried mtk engineerig application too.(24-10-2015, 06:11 AM)muhammed4u admin, please help me on how to change my innjoo halo imei number, it is already rooted.
* Download and Install Mobile Uncle then grant superuser permission
* Select Engineer mode
* Select Engineer mode (MTK)
* Navigate to the Connectivity tab
* Select CDS information
* Select Radio Information
At Phone 1: Insert the command below then click Send at command
Code:
AT+EGMR=1,7,"IMEI1"
At Phone 2: Insert the command below then click Send at command
Code:
AT+EGMR=1,10,"IMEI2"
* If you get an error like "This command is not allowed in user build" then leave a space between AT+ and EGMR as show below
Code:
AT+ EGMR=The rest of the code
Waste your time not.
The fone ain't mtk....it's spreadtrum
(25-10-2015, 12:34 PM)muhammed4u so spreadtrum cannot change imei no?
(13-05-2016, 12:36 PM)zebat How to upgrade innjoo halo to [LOLLIPOP] lollipop
Sent from my Halo using Hovatek mobile