[Tutorial] How to extract a Unisoc | Spreadtrum PAC firmware
[Tutorial] How to extract a Unisoc | Spreadtrum PAC firmware
Follow the steps below to unpack a Spreadtrum pac file
See the video below or @ https://youtu.be/rsjRMeB1niMQuote:In the video tutorial, i'm going to be showing how to extract a PAC firmware
For this we can use research download tool, upgrade download tool or factory download tool
any of them you like
So i'm going to use research download tool
We'll launch tool
Okay, so we need to load the PAC file
i'll locate the PAC firmware
Now we need to wait for it to load completely
Once extraction is complete, the loading bar would disappear and you will find the firmware's name
Now what we need to do is to go back to the folder
Image files >> under the research download tool folder
You'll find a folder randomly named
Open it
This is your extracted firmware
So you can copy this out or do whatever you want with it
So this is how you extract a PAC firmware or a PAC file
(04-08-2016, 12:19 PM)Tomsplendy Thanks alot hovatek i have downloaded the file already and it's safe but i do not know when to try it cos i don't have a PC. I don't know if you can help me extract the recovery image and post for me so i can just download it straight away since i don't have a system to do the procedures. Thanks a lot for the process, pretty straight forward.
Sent from my itel it1506 using Tapatalk
(19-02-2020, 12:17 PM)Aliyu Muhammad Ogabo Keke i need itel s15 firmware
(07-02-2021, 12:16 AM)yossi66a Thanks very much for your information about the research tool,
Is there any way i can then extract these bin files (image/kernel file) after the research tool has taken it out of the pac file?