necessary flag for the amlogic android tv
necessary flag for the amlogic android tv
18-07-2025, 08:50 PM
first thank you for all your great efforts and support.
I have an Amlogic u212 android13 tv, I used your site to port a TWRP for it, it appears to work good, but it miss an important thing,
which is the vision, the text it not clear at all, you could barely see if you sit next to the screen,
I did a lot of researches to solve it, finally I found out that a twrp for the Amlogic u212 android tv must have one more important flag
which is
TARGET_RECOVERY_FORCE_PIXEL_FORMAT := RGB_565
please to add this flag to your great twrp builder page.
and also it will be appreciated if you add this flag to my copy of twrp that built by your site.
attached,
my stock recovery
twrp ported by hovatek
BoardConfig.mk
thank you very much.
18-07-2025, 08:59 PM
I have an Amlogic u212 android13 tv, I used your site to port a TWRP for it, it appears to work good, but it miss an important thing,
which is the vision, the text it not clear at all, you could barely see if you sit next to the screen,
I did a lot of researches to solve it, finally I found out that a twrp for the Amlogic u212 android tv must have one more important flag
which is
TARGET_RECOVERY_FORCE_PIXEL_FORMAT := RGB_565
please to add this flag to your great twrp builder page.
and also it will be appreciated if you add this flag to my copy of twrp that built by your site.
attached,
my stock recovery
twrp ported by hovatek
BoardConfig.mk
thank you very much.
18-07-2025, 09:28 PM
(18-07-2025, 08:50 PM)sasecho333 first thank you for all your great efforts and support.
..
TARGET_RECOVERY_FORCE_PIXEL_FORMAT := RGB_565
...
thank you very much.
This flag has been added to our tool.
Do you remember the Work ID of your previous build?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
19-07-2025, 12:54 AM
yes my the work id of my previous build
hol6YaddUVnrbpJnatTa
it will be so appreciated, thank you very much.
19-07-2025, 08:31 AM
(19-07-2025, 12:54 AM)sasecho333 thank you very much for your reply, and sorry for the late response.
yes my the work id of my previous build
hol6YaddUVnrbpJnatTa
it will be so appreciated, thank you very much.
The flag has been added to your BoardConfig.mk and queued for build.
Just keep tracking that Work ID
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
20-07-2025, 03:57 AM
the screen issue solved very well, so it is confirmed that to build a twrp for the amlogic smart tv this flag need to be added.
I even test the OFRP is also needs this flag.
I will share some points that may be useful to the other visitors
the usb-otg didn't appear at first, I repacked the twrp and added the below line to the twrp.flags
# Removable storage
/usb-otg auto /dev/block/sda1 flags=storage;wipeingui;removable.
second point the data folder the build could not make a backup of it, although it managed to mount it.
if you have any advice about this it will be so useful and appreciated.
I will keep testing and updating.
many thanks again,
24-07-2025, 04:14 PM
(20-07-2025, 03:57 AM)sasecho333 ....
second point the data folder the build could not make a backup of it, although it managed to mount it.
if you have any advice about this it will be so useful and appreciated.
..
Our tool doesn't support decryption at the moment
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
