Posts: 4
Threads: 0
Joined: Sep 2018
Reputation:
1
Method number one works for me thanks.....
Posts: 145
Threads: 11
Joined: Nov 2020
Reputation:
0
Sir I'm stuck at custom recovery file, how to pass it?
Posts: 10
Threads: 1
Joined: Feb 2021
Reputation:
0
Hi, I'm trying to back up the Teclast M40 EEA v1.00 before updating it to 1.04.
EDIT:
Fixed by opening the pack and editing paths of files (I specify that in the guide it was not written that the pack had to be opened, it starts immediately with the settings).
[OLD]
Problem, when I try to follow the guide to create the pack, the tool gives me this error and creates a 103kb pac file.
Error:
Packeting failed! Failure to open original pac. (Error code = 5010)
Before this error, a skip warn message is shown in the guide. Except mine has an additional warn and it says:
Not selected FLASH to earase flash;
I can't understand where the problem lies (it also happens with version 21 of the tool as well as 24).
The "BMAConfig.xml" that I used is that of the tool with the manual addition of the "BMAConfig" used by my tablet in the official firmware 1.00 (just open the "ums512_1h10.xml" and add the device parameters to the list).
[OLD]
Thanks in advance.
(This post was last modified: 28-09-2021, 08:52 AM by
vegeth.
Edit Reason: Fixed? and moving part to another thread
)
Posts: 145
Threads: 11
Joined: Nov 2020
Reputation:
0
Can someone tell me what the fdl file is for? if the fdl file is wrong, what will happen to the phone? I need the above information to have proof that the fdl files in the firmware i am having are lost stock, flash pac file I found on google make my device black screen. After I have my phone under warranty I will probably back up the firmware, and if the fdl files I find online are not in stock, I may have to find a way get them from service center. I can't stand if I can't ROOT.
Posts: 145
Threads: 11
Joined: Nov 2020
Reputation:
0
like you said i can rest assured i don't have to beg the service center staff
Find
Reply
