Help with QFIL

BuckleyInDaHouse
Enthusiastic Member

10

27-03-2025, 06:23 PM

#1

I followed this specific guide about how to readback the rom of you qualcomm phone and I can never get passed this part.

I always get a sahara error and Partition manager window will never open.
I even followed a seperate post from the thread on this forum that i found that video on; how to fix sahara problem and I didnt come up with any luck. I also used Google and turned up nothing. Any specific points here?

1. I loaded QFIL and Selected FireHose Config.

Screenshot 2025-03-27 121208.png
Size: 51.89 KB / Downloads: 3

2. Tried each of the Files shown; I've managed to collect them over time from watching videos and browsing forums trying to get passed this.

Screenshot 2025-03-27 121458.png
Size: 33.79 KB / Downloads: 3

3. I then open partition manage in hopes to read back the rom and back the whole rom up.

Screenshot 2025-03-27 121607.png
Size: 24.8 KB / Downloads: 3

4. I finally stop with this.

Screenshot 2025-03-27 121757.png
Size: 14.96 KB / Downloads: 4

Screenshot 2025-03-27 121821.png
Size: 13.4 KB / Downloads: 3

Here's the Sahara page that I followed.
https://www.hovatek.com/blog/how-to-fix-...r-in-qfil/

maxpayne
Intern

4,288

30-03-2025, 09:02 AM

#2

(27-03-2025, 06:23 PM)BuckleyInDaHouse I followed this specific guide about how to readback...

Looks to me like you're using an incompatible firehose. What's the model and did you get firehose from the firmware?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

BuckleyInDaHouse
Enthusiastic Member

10

30-03-2025, 04:44 PM

#3

(30-03-2025, 09:02 AM)maxpayne
(27-03-2025, 06:23 PM)BuckleyInDaHouse I followed this specific guide about how to readback...

Looks to me like you're using an incompatible firehose. What's the model and did you get firehose from the firmware?

msm8937
qrd_emmc variant

maxpayne
Intern

4,288

03-04-2025, 09:52 AM

#4

(30-03-2025, 04:44 PM)BuckleyInDaHouse msm8937
qrd_emmc variant

I'm asking for the device model. Also, where did you get the firehose from?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

BuckleyInDaHouse
Enthusiastic Member

10

04-04-2025, 02:03 AM

#5

(03-04-2025, 09:52 AM)maxpayne
(30-03-2025, 04:44 PM)BuckleyInDaHouse msm8937
qrd_emmc variant

I'm asking for the device model. Also, where did you get the firehose from?

The device model is a Schok Volt SV55 and I found them in the folder of EdlClient from the same person who made MTKclient. I managed to get mtkclient to work but edlclient has far exceeded me.

maxpayne
Intern

4,288

17-04-2025, 08:32 AM

#6

(04-04-2025, 02:03 AM)BuckleyInDaHouse The device model is a Schok Volt SV55 and I found them in the folder of EdlClient from the same person who made MTKclient. I managed to get mtkclient to work but edlclient has far exceeded me.

Can you by any chance get the firmware?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

BuckleyInDaHouse
Enthusiastic Member

10

18-04-2025, 01:41 PM

#7

(17-04-2025, 08:32 AM)maxpayne
(04-04-2025, 02:03 AM)BuckleyInDaHouse The device model is a Schok Volt SV55 and I found them in the folder of EdlClient from the same person who made MTKclient. I managed to get mtkclient to work but edlclient has far exceeded me.

Can you by any chance get the firmware?

I've done a Google search before and I've just finished another one, I couldn't find anything for it besides a thread on XDA that i've visited already. It had a boot and recovery image but I felt like it wasn't for my phone but I used it still. Thats how I rooted it in the first place. Now I wish to restore that one but I cant use a single Firehose correctly with QFIL or EDL to back up my phones ROM. I have two of the SchokVolt SV55, so I felt generous enough to use the supplied boot and recovery image from a google search. With one phone being intact, i was trying to get a backup done.

SN: Is erasing the system.img before flashing a system.img completely necessary cause I tried many GSI's off google for my mediatek and none will prove to be complacent with my phone.

kelvinchinedu
Contributor

1,584

18-04-2025, 09:04 PM

#8

Because u are doing it wrong

BuckleyInDaHouse
Enthusiastic Member

10

23-04-2025, 08:49 PM

#9

(18-04-2025, 09:04 PM)kelvinchinedu Because u are doing it wrong

Okay, I've only seen about 1-2 guides via YouTube about QFIL and working with Sahara. Alongside that, I've seen many people mention Firehoses, a file needed to read the ROM I assume.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions