Infinix Hot 10t (X689C) STATUS_SEC_IMG_VFY_FAIL

Join us on

Hovatek Forum MOBILE Android [Please help] Infinix Hot 10t (X689C) STATUS_SEC_IMG_VFY_FAIL

[Please help] Infinix Hot 10t (X689C) STATUS_SEC_IMG_VFY_FAIL

[Please help] Infinix Hot 10t (X689C) STATUS_SEC_IMG_VFY_FAIL

View a Printable Version

ruvirus
Enthusiastic Member

8

06-12-2024, 08:54 AM

#1

Currently, the brick (phone) won't turn on, but it does react to the cable and (cable + volume up).
I flashed it with new firmware, installed Android 14, and decided to re-lock the bootloader. It then showed a Red State.
I tried flashing it back to stock firmware using SP Tool.
Now, during flashing, it displays this error:
STATUS_SEC_IMG_VFY_FAIL
What should I do? Need verification rom.

Attached Files

Снимок экрана 2024-12-05 233509.png
Size: 10.56 KB / Downloads: 5

ruvirus
Enthusiastic Member

8

07-12-2024, 11:37 AM

#2

The whole issue is with the tkv_a.img file.

Without it, I managed to flash Super.img (vbmeta_system_a and vbmeta_vendor_a are automatically set). But now it doesn't enter the flashing mode (holding Power and Volume Up). The phone won't turn on.

What should I do now?

This post was last modified: 07-12-2024, 11:46 AM by ruvirus.

justshez
Intern

2,363

09-12-2024, 08:01 AM

#3

(07-12-2024, 11:37 AM)ruvirus The whole issue is with the tkv_a.img file.

Without it, I managed to flash Super.img (vbmeta_system_a and vbmeta_vendor_a are automatically set). But now it doesn't enter the flashing mode (holding Power and Volume Up). The phone won't turn on.

What should I do now?

what's the phone showing up as in device manager?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

maxpayne
Intern

4,059

29-12-2024, 10:56 AM

#4

(07-12-2024, 11:37 AM)ruvirus The whole issue is with the tkv_a.img file.

Without it, I managed to flash Super.img (vbmeta_system_a and vbmeta_vendor_a are automatically set). But now it doesn't enter the flashing mode (holding Power and Volume Up). The phone won't turn on.

What should I do now?

What's the build number of the firmware you got these files from?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)

Join us