SWD after sales stuck 0%

Pages (2): 1 2 Next

zerozero231
Enthusiastic Member

07-08-2024, 10:12 AM

hello guys im using SWD / Tecno flash tools,to flash my bootloop device(tecno pova 5 pro)
but whenever i press start it return stuck 0% like in image(capture.png)
and then whenever i confirm the scatter files,it show popup box like in (capture1.png)

i already using 3 different firmware version

any help about these?

Attached Files

Capture.PNG
Size: 41.07 KB / Downloads: 6

Capture1.PNG
Size: 4.49 KB / Downloads: 3

maxpayne
Intern

3,804

07-08-2024, 03:20 PM

(07-08-2024, 10:12 AM)zerozero231 hello guys im using SWD / Tecno flash tools,to flash my bootloop device(tecno pova 5 pro)
but whenever i press start it return stuck 0% like in image(capture.png)
and then whenever i confirm the scatter files,it show popup box like in (capture1.png)

i already using 3 different firmware version

any help about these?

What is wrong with the phone and what's its present condition?
Try force BROM using Android Utility PRO (AUP). See if it does enter BROM

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

zerozero231
Enthusiastic Member

07-08-2024, 05:30 PM

(07-08-2024, 03:20 PM)maxpayne
(07-08-2024, 10:12 AM)zerozero231 hello guys im using SWD / Tecno flash tools,to flash my bootloop device(tecno pova 5 pro)
but whenever i press start it return stuck 0% like in image(capture.png)
and then whenever i confirm the scatter files,it show popup box like in (capture1.png)

i already using 3 different firmware version

any help about these?

What is wrong with the phone and what's its present condition?
Try force BROM using Android Utility PRO (AUP). See if it does enter BROM

my phone get bootloop,okay im gonna try that

zerozero231
Enthusiastic Member

09-08-2024, 05:32 PM

(07-08-2024, 03:20 PM)maxpayne
(07-08-2024, 10:12 AM)zerozero231 hello guys im using SWD / Tecno flash tools,to flash my bootloop device(tecno pova 5 pro)
but whenever i press start it return stuck 0% like in image(capture.png)
and then whenever i confirm the scatter files,it show popup box like in (capture1.png)

i already using 3 different firmware version

any help about these?

What is wrong with the phone and what's its present condition?
Try force BROM using Android Utility PRO (AUP). See if it does enter BROM

i already try this, i force my device to go BROM,and start flash with SWD, but yeah still same stuck 0% progress.
any alternative solution

oh i forgot to add some information :
i got my device bootloop because i try to update my android version using fastboot(i know it was a big mistake),

in short id did this in fastboot
fastboot delete-logical-partition product
fastboot erase-system
fastboot flash boot boot.img
astboofastboot flash super super.img
fastboot -w
fastboot reboot

and then my device get bootloop ,i cant enter fastboot menu with key combination ,i cant enter recovery too with combination,and i cant turn off my device(except my device had 0 battery).

maxpayne
Intern

3,804

10-08-2024, 10:41 AM

(09-08-2024, 05:32 PM)zerozero231 ...
and then my device get bootloop ,i cant enter fastboot menu with key combination ,i cant enter recovery too with combination,and i cant turn off my device(except my device had 0 battery).

Setup MTK client https://www.hovatek.com/forum/thread-46342.html
then run

Code:

python mtk.py payload

Share the output

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

zerozero231
Enthusiastic Member

10-08-2024, 06:54 PM

(10-08-2024, 10:41 AM)maxpayne
(09-08-2024, 05:32 PM)zerozero231 ...
and then my device get bootloop ,i cant enter fastboot menu with key combination ,i cant enter recovery too with combination,and i cant turn off my device(except my device had 0 battery).

Setup MTK client https://www.hovatek.com/forum/thread-46342.html
then run

Code:

python mtk.py payload

Share the output

i already run it and showing output like this ,(im so sorry if its too long)

Code:

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Device detected :)

Preloader -     CPU:            MT6833(Dimensity 700 5G k6833)

Preloader -     HW version:        0x0

Preloader -     WDT:            0x10007000

Preloader -     Uart:            0x11002000

Preloader -     Brom payload addr:    0x100a00

Preloader -     DA payload addr:    0x201000

Preloader -     CQ_DMA addr:        0x10212000

Preloader -     Var1:            0x73

Preloader - Disabling Watchdog...

Preloader - HW code:            0x989

Preloader - Target config:        0x5

Preloader -     SBC enabled:        True

Preloader -     SLA enabled:        False

Preloader -     DAA enabled:        True

Preloader -     SWJTAG enabled:        True

Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:    False

Preloader -     Root cert required:    False

Preloader -     Mem read auth:        False

Preloader -     Mem write auth:        False

Preloader -     Cmd 0xC8 blocked:    False

Preloader - Get Target info

Preloader -     HW subcode:        0x8a00

Preloader -     HW Ver:            0xca00

Preloader -     SW Ver:            0x0

Mtk - We're not in bootrom, trying to crash da...

PLTools - Crashing da...

Preloader

Preloader - [LIB]: upload_data failed with error: DAA_SIG_VERIFY_FAILED (0x7024)

Preloader

Preloader - [LIB]: Error on uploading da data

Preloader - Jumping to 0x0

usb_class - USBError(19, 'No such device (it may have been disconnected)')

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

usb_class

usb_class - [LIB]: Couldn't get device configuration.

Port - Hint:

Power off the phone before connecting.

For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.

For preloader mode, don't press any hw button and connect usb.

Port - Device detected :)

Preloader -     CPU:            MT6833(Dimensity 700 5G k6833)

Preloader -     HW version:        0x0

Preloader -     WDT:            0x10007000

Preloader -     Uart:            0x11002000

Preloader -     Brom payload addr:    0x100a00

Preloader -     DA payload addr:    0x201000

Preloader -     CQ_DMA addr:        0x10212000

Preloader -     Var1:            0x73

Preloader - Disabling Watchdog...

Preloader - HW code:            0x989

Preloader - Target config:        0x5

Preloader -     SBC enabled:        True

Preloader -     SLA enabled:        False

Preloader -     DAA enabled:        True

Preloader -     SWJTAG enabled:        True

Preloader -     EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:    False

Preloader -     Root cert required:    False

Preloader -     Mem read auth:        False

Preloader -     Mem write auth:        False

Preloader -     Cmd 0xC8 blocked:    False

Preloader - Get Target info

Preloader -     HW subcode:        0x8a00

Preloader -     HW Ver:            0xca00

Preloader -     SW Ver:            0x0

PLTools - Loading payload from mt6833_payload.bin, 0x264 bytes

PLTools - Kamakiri / DA Run

Kamakiri - Trying kamakiri2..

usb_class - USBError(19, 'No such device (it may have been disconnected)')

[Errno 19] No such device (it may have been disconnected)

Kamakiri - Done sending payload...

usb_class - USBError(19, 'No such device (it may have been disconnected)')

PLTools - Error, payload answered instead:

This post was last modified: 10-08-2024, 06:55 PM by zerozero231.

zerozero231
Enthusiastic Member

11-08-2024, 11:33 PM

update,now im trying using the ubuntu liveusb from mtkclient,but now showing different output like this :

PLTools - Loading payload from mt6833_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Traceback (most recent call last):
File "/opt/mtkclient/mtk", line 740, in <module>
mtk = Main(args).run()
File "/opt/mtkclient/mtkclient/Library/mtk_main.py", line 524, in run
self.cmd_payload(mtk=mtk, payloadfile=payloadfile)
File "/opt/mtkclient/mtkclient/Library/mtk_main.py", line 586, in cmd_payload
plt.runpayload(filename=payloadfile)
File "/opt/mtkclient/mtkclient/Library/pltools.py", line 102, in runpayload
if self.kama.payload(payload, addr, True, exploittype):
File "/opt/mtkclient/mtkclient/Library/kamakiri.py", line 139, in payload
if self.exploit2(payload, addr):
File "/opt/mtkclient/mtkclient/Library/kamakiri.py", line 116, in exploit2
self.linecode = self.mtk.port.cdc.device.ctrl_transfer(0xA1, 0x21, 0, 0, 7) + array.array('B', [0])
AttributeError: 'usb_class' object has no attribute 'device'

when i use gui version in debug log ,it keep stuck like this :
the status is just handshakde failed, keep retrying...
[22:37:14]: We're not in bootrom, trying to crash da...
[22:37:14]: Crashing da...
[22:37:18]: Crashing da...
[22:37:22]: Crashing da...
[22:37:25]: Loading payload from mt6833_payload.bin, 0x264 bytes
[22:37:25]: Kamakiri / DA Run
[22:37:25]: Trying kamakiri2..

i open to any alternative solution,i know im doing some mistake,i will learn now..thank you ()

This post was last modified: 11-08-2024, 11:40 PM by zerozero231.

maxpayne
Intern

3,804

15-08-2024, 10:49 AM

(10-08-2024, 06:54 PM)zerozero231 ...
usb_class - USBError(19, 'No such device (it may have been disconnected)')
[Errno 19] No such device (it may have been disconnected)
Kamakiri - Done sending payload...
usb_class - USBError(19, 'No such device (it may have been disconnected)')
PLTools - Error, payload answered instead:

This Windows error suggests the USB is getting disconnected. Try another cable, port on the PC or another Windows PC

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

zerozero231
Enthusiastic Member

17-08-2024, 08:59 PM

i already do it but now look like i need Download Agent / DA for Tecno Pova 5 pro

maxpayne
Intern

3,804

21-08-2024, 08:59 AM

#10

(17-08-2024, 08:59 PM)zerozero231 i already do it but now look like i need Download Agent / DA for Tecno Pova 5 pro

None available. Do you have the preloader.bin from the firmware?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

Pages (2): 1 2 Next

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions