We're hiring! Apply Now

Hovatek Forum MOBILE Android [Please help] Bricked Realme C11 2021 (RMX3231)

[Please help] Bricked Realme C11 2021 (RMX3231)

[Please help] Bricked Realme C11 2021 (RMX3231)

Pages (2): 1 2 Next
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
31-07-2024, 07:19 PM
#1



Hello, I have unlocked the OEM bootloader and flashed the phone with firmware with custom TWRP, installed Magisk And I used the phone as usual.
 A few days later, the phone was automatically updated to RMX3231RU_22.A.09, after which root disappeared, as well as TWRP, which is why I decided to flash it to RMX3231RU_22.A.77, but after that I got a brick.
I tried to revive it with various firmware versions, including the official ones, but I failed. Below I will attach logs of the latest firmware from Research Download R27 and Factory Download R27. (Besides them, I tried to fix it on R21 and R24, but there is no result.)

I was advised to apply here on the "4pda" forum, where you can read my messages.
This post was last modified: 31-07-2024, 07:31 PM by Shadow_1206.
Attached Files
.txt
UbootDump.txt
Size: 21.01 KB / Downloads: 12
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
31-07-2024, 07:26 PM
#2
for some reason, I can't download the 2nd archive with logs
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
31-07-2024, 08:46 PM
#3
I apologize for the flood... [ Login to download]
maxpayne
maxpayne
maxpayne
Intern
4,115
03-08-2024, 10:42 AM
#4
(31-07-2024, 07:19 PM)Shadow_1206 Hello, I have unlocked the OEM bootloader and flashed the phone with firmware with custom TWRP, installed Magisk And I used the phone as usual.
..

1. Did all flash successfully or failed?
2. Which tool and version did you use to flash?
3. What is the condition of the phone exactly? Dead, loop, stuck..what?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
04-08-2024, 09:16 AM
#5



(03-08-2024, 10:42 AM)maxpayne
(31-07-2024, 07:19 PM)Shadow_1206 Hello, I have unlocked the OEM bootloader and flashed the phone with firmware with custom TWRP, installed Magisk And I used the phone as usual.
..

1. Did all flash successfully or failed?
2. Which tool and version did you use to flash?
3. What is the condition of the phone exactly? Dead, loop, stuck..what?
1. The 1st firmware (Installation of the modified TWRP) is successful. The 2nd and subsequent unsuccessful.
2. Used "SPD Factory Tool", "SPD Research Tool" and "SPD Upgrade Tool". I tried versions 27, 25, 24 and 21 (The SPD Upgrade Tool always gave the error " [SW2068]!!!GSM Cali in phone is not calibrated,Reserved[7]:0x00000000,[ID=0x2]"
3. It is dead, does not turn on, if you disconnect the battery and insert the USB cable, it starts to "squeak" in the area of the motherboard.
maxpayne
maxpayne
maxpayne
Intern
4,115
10-08-2024, 09:41 AM
#6
(04-08-2024, 09:16 AM)Shadow_1206 ..

What I'm asking is which tool did you use to flash RMX3231RU_22.A.77 to the phone?
You should also try
RMX3231RU_22.A.67
RMX3231RU_22.A.85
This post was last modified: 10-08-2024, 09:49 AM by maxpayne.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
10-08-2024, 10:41 AM
#7
(10-08-2024, 09:41 AM)maxpayne
(04-08-2024, 09:16 AM)Shadow_1206 ..

What I'm asking is which tool did you use to flash RMX3231RU_22.A.77 to the phone?
You should also try
RMX3231RU_22.A.67
RMX3231RU_22.A.85
"SP Factory Download" and "SP Research Download"
Now I will try to flash the firmware that you specified, I hope it will help.
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
10-08-2024, 11:12 AM
#8
A.85 doesn't help, and A.67 can't download
Upd. After 22.A.85, the phone began to connect to the PC normally, you do not need to remove the battery in order for the PC to see the phone
This post was last modified: 10-08-2024, 11:14 AM by Shadow_1206.
maxpayne
maxpayne
maxpayne
Intern
4,115
15-08-2024, 10:05 AM
#9
(10-08-2024, 11:12 AM)Shadow_1206 A.85 doesn't help, and A.67 can't download
Upd. After 22.A.85, the phone began to connect to the PC normally, you do not need to remove the battery in order for the PC to see the phone

What is the problem with A67

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Shadow_1206
Shadow_1206
Shadow_1206
Enthusiastic Member
7
16-08-2024, 04:21 PM
#10
(15-08-2024, 10:05 AM)maxpayne
(10-08-2024, 11:12 AM)Shadow_1206 A.85 doesn't help, and A.67 can't download
Upd. After 22.A.85, the phone began to connect to the PC normally, you do not need to remove the battery in order for the PC to see the phone

What is the problem with A67
I can't find it and download it
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt