Join us on Tl   Wh

Hovatek Forum MOBILE Android Bricked redmi note 11 5G (Evergo)

Bricked redmi note 11 5G (Evergo)

Bricked redmi note 11 5G (Evergo)

Tornyeli
Tornyeli
Tornyeli
Newbie
3
08-06-2024, 11:25 AM
#1



Me:
Please I was trying to flash an indian rom on Redmi note 11 5G after I successfully unlocked its bootloader. I used mi flash for the flashing process but it could complete and a prompt about time out

I tried several times same .. so the device got bricked

I could still access fastboot mode but mi unlock wouldn't unlock my device too.. I tried several versions to no avail..
So I saw a post on hovatek and tried to flash with SP FLASH TOOL using the Chinese rom I got from mifirmware.com

And no device doesn't boot at all , no recovery, no fastboot but its recognized as mediatek usb port in device manager.. sp flash tool not flashing.. after loading the DA to 100% it tries to flash a partition but stays at 0% for hours
maxpayne
maxpayne
maxpayne
Intern
4,033
11-06-2024, 11:45 AM
#2
(08-06-2024, 11:25 AM)Tornyeli sp flash tool not flashing.. after loading the DA to 100% it tries to flash a partition but stays at 0% for hours

Use this https://www.hovatek.com/forum/thread-46342.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Tornyeli
Tornyeli
Tornyeli
Newbie
3
12-07-2024, 01:50 PM
#3
The flashing process started after I unticked the cust and rescue partitions,
But when flashing md1img  it stops at 61% and doesn't proceed anymore
Tornyeli
Tornyeli
Tornyeli
Newbie
3
12-07-2024, 01:56 PM
#4
Seems the battery is totally dead. Could it be the issue pls?.. i disconnected the battery before enting brom . Can it be flashed without a battery or a totally dead battery please?
savannahcarter
savannahcarter
savannahcarter
Enthusiastic Member
6
13-07-2024, 08:07 AM
#5



(08-06-2024, 11:25 AM)Tornyeli Me:
Please I was trying to flash an indian rom on Redmi note 11 5G after I successfully unlocked its bootloader. I used mi flash for the flashing process but it could complete and a prompt about time out

I tried several times same .. so the device got bricked

I could still access fastboot mode but mi unlock wouldn't unlock my device too.. I tried several versions to no avail..
So I saw a post on hovatek and tried to flash with SP FLASH TOOL using the Chinese rom I got from mifirmware.com

And no device doesn't boot at all , no recovery, no fastboot but its recognized as mediatek usb port in device manager.. sp flash tool not flashing.. after loading the DA to 100% it tries to flash a partition but stays at 0% for hours

Hello,
After attempting to flash an Indian ROM on my Redmi Note 11 5G using Mi Flash, the process timed out and bricked the device. Now, despite being recognized as a MediaTek USB port in Device Manager, SP Flash Tool fails to flash, getting stuck at 0% after loading the DA to 100%.
justshez
justshez
justshez
Intern
2,356
15-07-2024, 03:16 PM
#6
(12-07-2024, 01:50 PM)Tornyeli The flashing process started after I unticked the cust and rescue partitions,
But when flashing md1img  it stops at 61% and doesn't proceed anymore

Untick all then flash each component one after the other

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt