[Please help] Problem with Tecno LF7 in MTK Client and SP.
[Please help] Problem with Tecno LF7 in MTK Client and SP.
(13-05-2024, 07:10 AM)Exoduss Hello! Lately I have been trying to flash the firmware of my Tecno Pova 3 LF7 device.
Previously I installed the GSI rom using Platforms Tools, being successful, although after time I want to install the latest version of my device's firmware.
I tried with SP Flash Tool but I had problems since my device has Secure Boot and I cannot do the Auth Bypass by any Multitool, since I cannot access the BROM, only the Preloader.
Now I tried to do the method of deactivating the security through the MTK Client with the command "python mtk payload" but when I put the command and connect my device while holding both volume buttons, it gives me this error:
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
So I can't do anything to flash the firmware...
I would like someone to guide me, I would greatly appreciate it.
(16-05-2024, 12:42 AM)maxpayne(13-05-2024, 07:10 AM)Exoduss Hello! Lately I have been trying to flash the firmware of my Tecno Pova 3 LF7 device.
Previously I installed the GSI rom using Platforms Tools, being successful, although after time I want to install the latest version of my device's firmware.
I tried with SP Flash Tool but I had problems since my device has Secure Boot and I cannot do the Auth Bypass by any Multitool, since I cannot access the BROM, only the Preloader.
Now I tried to do the method of deactivating the security through the MTK Client with the command "python mtk payload" but when I put the command and connect my device while holding both volume buttons, it gives me this error:
Preloader - [LIB]: ←[31mStatus: Handshake failed, retrying...←[0m
So I can't do anything to flash the firmware...
I would like someone to guide me, I would greatly appreciate it.
MT6769 isn't supported
(18-05-2024, 08:57 PM)Exoduss So how could I flash my device? Impossible?
(22-05-2024, 05:32 PM)maxpayne(18-05-2024, 08:57 PM)Exoduss So how could I flash my device? Impossible?
The problem is crashing to BROM. It seems you're running on a version that has disabled this.
Try these methods
https://www.hovatek.com/blog/how-to-forc...brom-mode/
You have the firmware right? Share a screenshot of all its contents
(13-06-2024, 07:28 AM)Exoduss Hello! If I have the firmware for my Tecno Pova 3, below I share the documents contained in it.
By the way, I couldn't do the solution that you shared with me to be able to bypass the problems, I don't know what to do to be able to flash my phone.
(14-06-2024, 08:49 AM)maxpayne(13-06-2024, 07:28 AM)Exoduss Hello! If I have the firmware for my Tecno Pova 3, below I share the documents contained in it.
By the way, I couldn't do the solution that you shared with me to be able to bypass the problems, I don't know what to do to be able to flash my phone.
This is factory firmware.
Based on what you have said, your device isn't yet bricked so you could downgrade the firmware using fastboot after which BROM exploit should work again. But flashing the latest firmware would disable BROM exploit.
(14-06-2024, 09:54 PM)Exoduss Approximately a month ago I installed a GSI rom, through fastboot through the Platform Tools SDK.
So which files would I have to flash using fastboot to perform the Downgrade? Only the boot.img and the super.img?
