Hello sir
I flashing my infinix note 11 x663 in SP tool as per guide in forum and I also download firmware
[Hovatek]_Infinix_Note_11_(X663-H6915ABCEFGHIO-R-GL-220822V921) from forum link. And also download letest version of sp flash tool.
Everything going fine vcom driver, libusb driver, mtk byepass too, sp flash tool work properly, load the scatter file and select download only mode allmost going good still now at 100% finish point I show error
STATUS_SEC_IMG_TYPE_MISMATCH (0XC002002A)
[HINT]:
Verified boot is enable
Please download signed image(tranfs-verified.img) or disable verified boot.
Now after that I decided to skip tranfs.img and re flash with same all settings.
Only uncheck tranfs.img in check list and start download on download only mode.
Then at the very 1st second I got this
Error: STATUS_DEVICE_CTRL_EXCEPTION(0xC0050001)
[HINT]:
And at the same time I see Device not recognised in my pc I shocked 😮 disconnect and try to reconnect but it still not recognised. I try to boot mobile but it not start any of the way and not connecting to pc
Now it's totally dead like
No switch on, no power button work, no volume combination work, no vibration when connect the usb cable with pc or power adaptor. This infinix note 11 X663 model have no notification light 🚨 so have no confirmation of battery will charge when I connect with charger adaptor.
Can I hard brick my mobile? If yes then any solution to fix this problem. What I do to unbrick it.
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
