Join us on Tl   Wh

Hovatek Forum MOBILE Android How to GETPARTITIONINFO with REST in cmd mode

How to GETPARTITIONINFO with REST in cmd mode

How to GETPARTITIONINFO with REST in cmd mode

 View a Printable Version
 
kentLee
kentLee
kentLee
Newbie
Find
1
04-12-2023, 04:13 AM
#1



For 'GETPARTITIONINFO' in cmd mode.  I use the command line is '"QFIL.exe -Mode=3 -COM=20 -GETPARTITIONINFO -Programmer="true;D:\CodeWorkSpace\binaries\xbl_s_devprg_ns.melf" -deviceType="nand" -searchpath="D:\CodeWorkSpace\binaries" -Rawprogram="rawprogram_nand_p4K_b256K.xml" -Patch="patch_p4K_b256K.xml" -LOGFILEPATH="D:CodeWorkSpace\qfil.log""
     For the " GETPARTITIONINFO" option, it can complete the function of get flash information, but after this, it can not restart to EDL mode, so i have to manually power the device to achieve the "reset to EDL" effect.
     I found that QFIL's 'TOOL->GetFlash Infomation' function can 'reset to EDL' after completion, if I want to implement the same ' GetFlash Infomation' function in CMD mode, what commands need to be modified?
The 'TOOL->GetFlash Infomation' logfile is ' GetFlash Infomation.log'
Quote:19:27:37: INFO: TARGET SAID: 'INFO: {"storage_info": {"total_blocks":8191, "block_size":262144, "page_size":4096, "num_physical":1, "manufacturer_id":44, "serial_num":0, "fw_version":"","mem_type":"NAND","prod_name":""}}'
19:27:37: INFO: Response was success in running to unrecognized TAG (response)
19:27:38: INFO: ==============================================================
19:27:38: INFO: Files used and their paths
19:27:38: INFO:  1 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'

19:27:38: INFO:      _            (done)
19:27:38: INFO:    | |               
19:27:38: INFO:  __| | ___  _ __  ___
19:27:38: INFO:  / _` |/ _ \| '_ \ / _ \
19:27:38: INFO: | (_| | (_) | | | |  __/
19:27:38: INFO:  \__,_|\___/|_| |_|\___|
19:27:38: INFO: {All Finished Successfully}

19:27:38: INFO: Overall to target  5.391 seconds (0.00 Bps)

Writing log to 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt', might take a minute


Log is 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'

Finish Get Flash Infomation
Start Reset To EDL
***** Working Folder:C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
Finish Get Flash

Base Version: 19.06.10.18.44
Binary build date: Jun 25 2019 @ 03:16:10
Incremental Build version: 19.06.25.03.16.10

19:28:11: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM20 --sendxml=ResetToEDL.xml --search_path=C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=nand
************************************************

19:28:11: INFO: Current working dir (cwd): C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\
19:28:11: INFO: Showing network mappings to allow debugging
19:28:11: INFO:



19:28:11: INFO: Trying to store 'ResetToEDL.xml' in string table
19:28:11: INFO: Looking for file 'ResetToEDL.xml'
19:28:11: INFO: User wants to talk to port '\\.\COM20'
19:28:11: INFO: Took      0.01600000 seconds to open port
19:28:11: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:28:11: INFO: Sending <configure>

19:28:11: INFO: TARGET SAID: 'INFO: Calling handler for configure'

19:28:11: INFO: TARGET SAID: 'INFO: Storage type set to value nand'

19:28:11: INFO: TARGET SAID: 'WARN: NAK: MaxPayloadSizeToTargetInBytes sent by host 1048576 larger than supported 16384'
19:28:11: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 16384
19:28:11: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 16384
19:28:11: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
19:28:11: INFO: Sending <power>

19:28:11: INFO: TARGET SAID: 'INFO: Calling handler for power'

19:28:11: INFO: TARGET SAID: 'INFO: Will issue reset/power off 300000 useconds, if this hangs check if watchdog is enabled'

19:28:11: INFO: TARGET SAID: 'INFO: bsp_target_reset_edl() 3'
19:28:11: INFO: ==============================================================
19:28:11: INFO: Files used and their paths
19:28:11: INFO:  1 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'
19:28:11: INFO:  2 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\ResetToEDL.xml'

19:28:11: INFO:      _            (done)
19:28:11: INFO:    | |               
19:28:11: INFO:  __| | ___  _ __  ___
19:28:11: INFO:  / _` |/ _ \| '_ \ / _ \
19:28:11: INFO: | (_| | (_) | | | |  __/
19:28:11: INFO:  \__,_|\___/|_| |_|\___|
19:28:11: INFO: {All Finished Successfully}

19:28:11: INFO: Overall to target  0.062 seconds (0.00 Bps)

Writing log to 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt', might take a minute


Log is 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'

Delay 5s for reset...
Waiting for reset done...
Finish Reset To EDL

My log is ' GETPARTITIONINFO.log'
Quote:2023-12-04 10:59:06.711    10:59:06: INFO: TARGET SAID: 'INFO: {"storage_info": {"total_blocks":8191, "block_size":262144, "page_size":4096, "num_physical":1, "manufacturer_id":44, "serial_num":0, "fw_version":"","mem_type":"NAND","prod_name":""}}'
2023-12-04 10:59:06.712    10:59:06: INFO: Response was success in running to unrecognized TAG (response)
2023-12-04 10:59:06.712    10:59:06: INFO: ==============================================================
2023-12-04 10:59:06.712    10:59:06: INFO: Files used and their paths
2023-12-04 10:59:06.712    10:59:06: INFO:  1 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'
2023-12-04 10:59:06.713   
2023-12-04 10:59:06.713    10:59:06: INFO:      _            (done)
2023-12-04 10:59:06.713    10:59:06: INFO:    | |               
2023-12-04 10:59:06.713    10:59:06: INFO:  __| | ___  _ __  ___
2023-12-04 10:59:06.713    10:59:06: INFO:  / _` |/ _ \| '_ \ / _ \
2023-12-04 10:59:06.713    10:59:06: INFO: | (_| | (_) | | | |  __/
2023-12-04 10:59:06.714    10:59:06: INFO:  \__,_|\___/|_| |_|\___|
2023-12-04 10:59:06.714    10:59:06: INFO: {All Finished Successfully}
2023-12-04 10:59:06.714   
2023-12-04 10:59:06.714    10:59:06: INFO: Overall to target  5.391 seconds (0.00 Bps)
2023-12-04 10:59:06.714   
2023-12-04 10:59:06.715    Writing log to 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt', might take a minute
2023-12-04 10:59:06.715   
2023-12-04 10:59:06.715   
2023-12-04 10:59:06.715    Log is 'C:\Users\kent.li\AppData\Roaming\Qualcomm\QFIL\COMPORT_20\port_trace.txt'
2023-12-04 10:59:06.715   
2023-12-04 10:59:06.716    GetPartitions Fail:FireHose Fail:Storage type is not supportted
2023-12-04 10:59:06.717    Finish GetPartitions
Reply
Reply
AutoResponder
AutoResponder
AutoResponder
Verified Account
Find
609
04-12-2023, 04:13 AM
#2
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
Reply
Reply
 View a Printable Version
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt