Hovatek Forum MOBILE Android HELP- Clone i14 pro max (chipset mt6753) - windows no longer recognizes the device
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


HELP- Clone i14 pro max (chipset mt6753) - windows no longer recognizes the device

HELP- Clone i14 pro max (chipset mt6753) - windows no longer recognizes the device

Pages (2): 1 2 Next
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
06-10-2023, 10:04 AM
#1



Hi, let me introduce myself, my name is Gio and I'm a novice with MODDING devices.... and unfortunately at the first FLASH of the FIRMWARE I sent the device to BRICK...
I basically did everything right, windows and SP FLASH TOOLS recognized the device, I also found the ROMs of the device in question (MTK6753 CPU)... but instead of doing "DOWNLOAD" I made a mistake following the suggestion of SP FLASH TOOL and did "FORMAT +UPGRADE", everything seemed ok.. the procedure also finished correctly but unfortunately the device now no longer turns on...

Now if I try to DOWNLOAD (also including the PRELOADER among all the scatter files) it gives me "ERROR 4032 ENABLE DRAM FAILED", if instead I do DOWNLOAD excluding the PRELOADER Windows gives me the message "USB composition device not recognized (descriptor request failed".
Has this happened to anyone yet? In my ignorance I think the mistake was in doing FORMAT+UPGRADE and not simply DOWNLOAD...
If I can I'll post some photos.

Thanks in advance
AutoResponder
AutoResponder
AutoResponder
Verified Account
609
06-10-2023, 10:04 AM
#2
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
maxpayne
maxpayne
maxpayne
Intern
3,064
06-10-2023, 03:14 PM
#3
(06-10-2023, 10:04 AM)Giosue1987 Hi, let me introduce myself, my name is Gio and I'm a novice with MODDING devices.... and unfortunately at the first FLASH of the FIRMWARE I sent the device to BRICK...
I basically did everything right, windows and SP FLASH TOOLS recognized the device, I also found the ROMs of the device in question (MTK6753 CPU)... but instead of doing "DOWNLOAD" I made a mistake following the suggestion of SP FLASH TOOL and did "FORMAT +UPGRADE", everything seemed ok.. the procedure also finished correctly but unfortunately the device now no longer turns on...

Now if I try to DOWNLOAD (also including the PRELOADER among all the scatter files) it gives me "ERROR 4032 ENABLE DRAM FAILED", if instead I do DOWNLOAD excluding the PRELOADER Windows gives me the message "USB composition device not recognized (descriptor request failed".
Has this happened to anyone yet? In my ignorance I think the mistake was in doing FORMAT+UPGRADE and not simply DOWNLOAD...
If I can I'll post some photos.

Thanks in advance

1. Are you sure you downloaded the right firmware?
2. Have you tried disconnecting and reconnecting the battery?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
06-10-2023, 04:09 PM
#4
(06-10-2023, 03:14 PM)maxpayne
(06-10-2023, 10:04 AM)Giosue1987 Hi, let me introduce myself, my name is Gio and I'm a novice with MODDING devices.... and unfortunately at the first FLASH of the FIRMWARE I sent the device to BRICK...
I basically did everything right, windows and SP FLASH TOOLS recognized the device, I also found the ROMs of the device in question (MTK6753 CPU)... but instead of doing "DOWNLOAD" I made a mistake following the suggestion of SP FLASH TOOL and did "FORMAT +UPGRADE", everything seemed ok.. the procedure also finished correctly but unfortunately the device now no longer turns on...

Now if I try to DOWNLOAD (also including the PRELOADER among all the scatter files) it gives me "ERROR 4032 ENABLE DRAM FAILED", if instead I do DOWNLOAD excluding the PRELOADER Windows gives me the message "USB composition device not recognized (descriptor request failed".
Has this happened to anyone yet? In my ignorance I think the mistake was in doing FORMAT+UPGRADE and not simply DOWNLOAD...
If I can I'll post some photos.

Thanks in advance

1. Are you sure you downloaded the right firmware?
2. Have you tried disconnecting and reconnecting the battery?

The firmware I took from this link ... corresponds by version and CHIPSET...

https://www.needrom.com/download/phone-i14-pro-max/ 

About the battery you can not remove it but I disabled the battery option directly from SP FLASH TOOLS...
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
06-10-2023, 04:17 PM
#5



(06-10-2023, 03:14 PM)maxpayne
(06-10-2023, 10:04 AM)Giosue1987 Hi, let me introduce myself, my name is Gio and I'm a novice with MODDING devices.... and unfortunately at the first FLASH of the FIRMWARE I sent the device to BRICK...
I basically did everything right, windows and SP FLASH TOOLS recognized the device, I also found the ROMs of the device in question (MTK6753 CPU)... but instead of doing "DOWNLOAD" I made a mistake following the suggestion of SP FLASH TOOL and did "FORMAT +UPGRADE", everything seemed ok.. the procedure also finished correctly but unfortunately the device now no longer turns on...

Now if I try to DOWNLOAD (also including the PRELOADER among all the scatter files) it gives me "ERROR 4032 ENABLE DRAM FAILED", if instead I do DOWNLOAD excluding the PRELOADER Windows gives me the message "USB composition device not recognized (descriptor request failed".
Has this happened to anyone yet? In my ignorance I think the mistake was in doing FORMAT+UPGRADE and not simply DOWNLOAD...
If I can I'll post some photos.

Thanks in advance

1. Are you sure you downloaded the right firmware?
2. Have you tried disconnecting and reconnecting the battery?
The firmware I took from this link ... corresponds by version and CHIPSET...

https://www.needrom.com/download/phone-i14-pro-max/ 

about the battery you can not remove it but I disabled the battery option directly from SP FLASH TOOLS...
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
06-10-2023, 11:25 PM
#6
I cleaned everything up.. I uninstalled all drivers using the USB Device program... I restarted and reinstalled the MTK drivers of PRELOAD.. now when I attach the device to the PC it is as if it plugs in and disconnects continuously.. even without opening the apps.. It is a device recognition problem.
This post was last modified: 06-10-2023, 11:26 PM by Giosue1987.
maxpayne
maxpayne
maxpayne
Intern
3,064
09-10-2023, 09:41 AM
#7
(06-10-2023, 11:25 PM)Giosue1987 I cleaned everything up.. I uninstalled all drivers using the USB Device program... I restarted and reinstalled the MTK drivers of PRELOAD.. now when I attach the device to the PC it is as if it plugs in and disconnects continuously.. even without opening the apps.. It is a device recognition problem.

Try reflashing the firmware using Download Only.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
09-10-2023, 03:04 PM
#8
I've already tried.. but Windows no longer recognizes my device... it emits beeps as if I plugged in and unplugged the device from the computer..

if I try to DOWNLOAD (also including the PRELOADER among all the scatter files) it gives me "ERROR 4032 ENABLE DRAM FAILED", if instead I do DOWNLOAD excluding the PRELOADER Windows gives me the message "USB composition device not recognized (descriptor request failed)".
This post was last modified: 09-10-2023, 03:15 PM by Giosue1987.
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
10-10-2023, 05:23 PM
#9
I found useful information about my device before doing FORMAT+ DOWNLOAD.. Is there any way to recover it?


Attached Files
.jpg
IMG-20231010-WA0078.jpg
Size: 66.84 KB / Downloads: 2
.jpg
IMG-20231010-WA0077.jpg
Size: 62.2 KB / Downloads: 2
.jpg
IMG-20231010-WA0073.jpg
Size: 72.71 KB / Downloads: 1
.jpg
IMG-20231010-WA0076.jpg
Size: 61.02 KB / Downloads: 1
.jpg
IMG-20231010-WA0074.jpg
Size: 83.84 KB / Downloads: 1
.jpg
IMG-20231010-WA0075.jpg
Size: 438.32 KB / Downloads: 2
Giosue1987
Giosue1987
Giosue1987
Enthusiastic Member
13
10-10-2023, 07:18 PM
#10
Ok there are news... I tried another firmware.. and I managed to install it (FORMAT + UPGRADE).. Now it gives signs of life but the screen is not seen, it lights up only slightly.

Here is the firmware..


https://forum.gsmhosting.com/vbb/f781/ch...e-3205148/

I think it is compatible but it is for CLONE S23 ULTRA.. .
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl