Join us on Tl   Wh

Hovatek Forum MOBILE Android Infinix Hot 30 Play Bootloop [X6835]

Infinix Hot 30 Play Bootloop [X6835]

Infinix Hot 30 Play Bootloop [X6835]

dubsteam
dubsteam
dubsteam
Newbie
4
28-09-2023, 04:58 PM
#1



Hi, I recently flash TWRP lion v3.7 on my phone but the phone keeps boot-looping after it. I can't also boot into fastboot mode.

The phone gets detected when I plugin with my computer and I have tried to disable auth by usingĀ https://github.com/MTK-bypass/bypass_utility but it fails to do that.

I have also tried to drain the battery completely and then tried flashing the stock rom but it says custom_da_failed error

Any help would be appreciated.
AutoResponder
AutoResponder
AutoResponder
Verified Account
609
28-09-2023, 04:58 PM
#2
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,454
29-09-2023, 08:22 PM
#3
Use mtkbyepass ,to flash full rom
Volume up and down only

And next time u want to flash twrp make sure u unlock bootloader and flash vbmeta first before flash twrp
And if u are using a/b device flash twrp into boot partition and copy your stock boot into your phone storage using adb along with the twrp
And flash back stock boot into boot partition and install recovery as ramdisk through twrp
dubsteam
dubsteam
dubsteam
Newbie
4
29-09-2023, 08:50 PM
#4
(29-09-2023, 08:22 PM)kelvinchinedu Use mtkbyepass ,to flash full rom
Volume up and down only

And next time u want to flash twrp make sure u unlock bootloader and flash vbmeta first before flash twrp
And if u are using a/b device flash twrp into boot partition and copy your stock boot into your phone storage using adb along with the twrp
And flash back stock boot into boot partition and install recovery as ramdisk through twrp

Thank you for the response.

@kelvinchinedu, It can't detect the phone, when the phone has battery connected, I tried the phone powered off and pressed volume +/- (Hold) and connected the phone with the computer while the bypass being started and waiting for the device to be connected.

It says in the logs that device inserted and after one or two second, says device removed. It successfully crashes the device into the preloader.

The device bootloader is unlocked, can't go into fastboot/download mode or adb anything.

Also tried disconnecting battery and flashing the rom, still it doesn't work.
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,454
30-09-2023, 09:42 PM
#5



Did u get detected when u hold volume up and down?
dubsteam
dubsteam
dubsteam
Newbie
4
01-10-2023, 08:57 AM
#6
It does for a second and then disconnects.
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,454
01-10-2023, 06:29 PM
#7
When u disconnect battery don't hold any botton
dubsteam
dubsteam
dubsteam
Newbie
4
01-10-2023, 06:47 PM
#8
Just I have to run the mtkbypass and then plug in the mobile with USB on computer?
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,454
02-10-2023, 04:26 PM
#9
Yes do that without battery
maxpayne
maxpayne
maxpayne
Intern
3,953
05-10-2023, 04:15 PM
#10
(01-10-2023, 06:47 PM)dubsteam Just I have to run the mtkbypass and then plug in the mobile with USB on computer?

Are you using mtk client or mtk bypass? which?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt