MediaTek Software Repairs Training! Join Now

Hovatek Forum MOBILE Android hisense A7CC recovery

hisense A7CC recovery

hisense A7CC recovery

feika
feika
feika
Enthusiastic Member
9
12-09-2023, 06:23 PM
#1



I tried to make my own recovery and during the flashing the computer restarted, now the phone weighs on the download and does not want to go into recovery sd cadr. Computer it goes in as com port what software it can be reanimated? proocessor 64bit Unisoc Tiger T7510
AutoResponder
AutoResponder
AutoResponder
Verified Account
609
12-09-2023, 06:23 PM
#2
Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote
maxpayne
maxpayne
maxpayne
Intern
4,431
14-09-2023, 12:12 PM
#3
(12-09-2023, 06:23 PM)AutoResponder Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote

You have the pac file?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
feika
feika
feika
Enthusiastic Member
9
16-09-2023, 08:10 AM
#4
No, I have the standard firmware under the SD card of 3 bin files.
Gargoyle
Gargoyle
Gargoyle
Contributor
542
16-09-2023, 08:46 AM
#5



(16-09-2023, 08:10 AM)feika No, I have the standard firmware under the SD card of 3 bin files.

1 Prepare a TF card ( capacity TF card must be less than or equal to 6G) , first card formatted in FAT format TF
2 unrar the downloaded rom brush , which will be copied to the HNR320T_TF root directory of TF card package
3 confirmed that the battery is greater than 50 %, if the battery is low, please charged
4 TF card into the phone , the battery in the phone. The preparatory work is completed.


1 the phone is off, hold the "Volume + + + VOLUME DOWN button power button" three keys , phone mode upgrade to begin the upgrade .
2 Brush word "OK" after the success
3 simply remove the battery
4 then connect the phone battery , press the power button on the phone to boot. After starting in the phones menu "Settings" – Save and Reset – restore factory settings – Reset phone – all clear content .
5 the phone will automatically restart and recover the state of the factory, the screen saver .
6 success!
feika
feika
feika
Enthusiastic Member
9
18-09-2023, 06:01 AM
#6
1 the phone is off, hold the "Volume + + + VOLUME DOWN button power button" three keys , phone mode upgrade to begin the upgrade .

Doesn't go into recavery just hangs and that's it, if you press volume+ and power goes to restart
feika
feika
feika
Enthusiastic Member
9
02-12-2023, 03:29 PM
#7
(16-09-2023, 08:46 AM)Gargoyle
(16-09-2023, 08:10 AM)feika No, I have the standard firmware under the SD card of 3 bin files.

1 Prepare a TF card ( capacity TF card must be less than or equal to 6G) , first card formatted in FAT format TF
2 unrar the downloaded rom brush , which will be copied to the HNR320T_TF root directory of TF card package
3 confirmed that the battery is greater than 50 %, if the battery is low, please charged
4 TF card into the phone , the battery in the phone. The preparatory work is completed.


1 the phone is off, hold the "Volume + + + VOLUME DOWN button power button" three keys , phone mode upgrade to begin the upgrade .
2 Brush word "OK" after the success
3 simply remove the battery
4 then connect the phone battery , press the power button on the phone to boot. After starting in the phones menu "Settings" – Save and Reset – restore factory settings – Reset phone – all clear content .
5 the phone will automatically restart and recover the state of the factory, the screen saver .
6 success!

I took the card 6 gigs but in the firmware 3 files HNR320T, HNR320_1, HNR320_2 and each weighs 3.5 gigs how to write them to the card 6 gigs or write only the first?
maxpayne
maxpayne
maxpayne
Intern
4,431
04-01-2024, 10:39 AM
#8
(02-12-2023, 03:29 PM)feika I took the card 6 gigs but in the firmware 3 files HNR320T, HNR320_1, HNR320_2 and each weighs 3.5 gigs how to write them to the card 6 gigs or write only the first?

Share screenshots showing the content of each zip

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt