"status read failed (too many links)" error when trying to boot twrp image

[Please help] "status read failed (too many links)" error when trying to boot twrp image

ardx1
Enthusiastic Member

6

25-08-2023, 05:26 PM

#1

So my friend was helping me create a twrp image for my phone. We unlocked the bootloader, etc. But now when I was flashing the twrp image. I got an error.
What is this caused by and how can I fix it?
My device: Tecno Kg6p
Link of the twrp image he created: https://github.com/kelexine/recovery-rel...tag/v2.0.0[attachment=11247]

AutoResponder
Verified Account

609

25-08-2023, 05:26 PM

#2

Thank you for reaching out for support. Due to high demand, our free support services may experience some delays in response time. We apologize for any inconvenience this may cause.
Alternatively, we offer private support where you can receive dedicated attention and prompt support. These sessions are designed to provide personalized solutions to your specific needs.
If you are interested in scheduling a private session, please visit https://www.hovatek.com/remote

kelvinchinedu
Contributor

1,649

29-08-2023, 10:36 PM

#3

Are u trying to boot it or u want to flash it into boot partition? If boot it will not work
Don't be afraid if u got the error when your device has a/b
What you will do is this

Put your stock boot ,vbmeta ,and twrp into the PC and boot into bootloader
Then run
Fastboot flash boot (twrp u creat)
Then fastboot reboot recovery

Then still connect to PC and run adb devices
If u see device recovery
Then u are good to go
But if not disconnect and reboot back to twrp from twrp and reconnect
When u can confirm is working then do
adb push twrp.img /sdcard
adb push boot.img /sdcard

After that go back to twrp and install stock boot into boot partition and then advance and select into recovery ramdisk
The select your created twrp and flash

U need this push command if only you have 0mb data

After that reboot

ardx1
Enthusiastic Member

6

30-08-2023, 05:11 PM

#4

Hi. So, i also did that. the thing is, all the device did was booting into fastboot. Is this a problem related to device tree?
https://github.com/kelexine/recovery-rel...tag/v2.0.0 --> TWRP
https://github.com/kelexine/rom-dumper/r...5779560667 --> Stock ROM

kelvinchinedu
Contributor

1,649

30-08-2023, 05:57 PM

#5

Yea

What is the device

ardx1
Enthusiastic Member

6

30-08-2023, 06:02 PM

#6

Tecno Spart 8T. (KG6P)
Mediatek Helio G35

(30-08-2023, 05:57 PM)kelvinchinedu Yea

What is the device

kelvinchinedu
Contributor

1,649

30-08-2023, 08:28 PM

#7

The device tree issue

ardx1
Enthusiastic Member

6

30-08-2023, 08:37 PM

#8

Wdym? If you asked if i know what the device tree issue is, no but it is what i'm asking currently Tongue

This post was last modified: 30-08-2023, 08:37 PM by ardx1.

kelvinchinedu
Contributor

1,649

31-08-2023, 08:10 PM

#9

U need to upload your firmware on GitHub.com and drop your boot image since no recovery partition

ardx1
Enthusiastic Member

6

01-09-2023, 04:19 PM

#10

(31-08-2023, 08:10 PM)kelvinchinedu U need to upload your firmware on GitHub.com and drop your boot image since no recovery partition

https://github.com/kelexine/rom-dumper/r...5779560667
here is my firmware.
https://github.com/kelexine/recovery-rel...tag/v2.0.0
and this is the twrp image i flashed to the boot. which just led me to fastboot and not twrp

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions