Brick after format MT8163

[Please help] Brick after format MT8163

justshez
Senior Member

2,505

29-04-2023, 02:07 PM

#11

(26-04-2023, 03:25 PM)saliks device manager

Have you tried flashing back full firmware?

saliks
Junior Member

17

29-04-2023, 03:24 PM

#12

yes,i have full dump
https://ibb.co/RDYVbYD
before the format (and brick), I had restored 2-3 times with these files.
after formata sp flash tool after 40'' give 4032 error.

This post was last modified: 29-04-2023, 03:25 PM by saliks.

barlas1
Enthusiastic Member

6

30-04-2023, 04:06 AM

#13

(29-04-2023, 03:24 PM)saliks yes,i have full dump
https://ibb.co/RDYVbYD
before the format (and brick), I had restored 2-3 times with these files.
after formata sp flash tool after 40'' give 4032 error.

You could also try holding the volume increase button before connecting to PC for flashing.
try other button combos like
volume increase
volume decrease
volume increase + power button
volume decrease + power button

waiting.....

BTW, That error 4032 probably means the files you're using dont match your phone.
That's what I found on another forum
It means after format your firmware files can't be flashed
Try downloading other firmware files?
Or try https://spflashtools.com/windows/sp-flash-tool-v3-1332 this version of flash tool and flash by again formatting

barlas1
Enthusiastic Member

6

30-04-2023, 04:11 AM

#14

https://romprovider.com/sp-flash-tools-e...-solution/
Or try these solutions?

barlas1
Enthusiastic Member

6

30-04-2023, 04:14 AM

#15

(21-04-2023, 06:40 PM)saliks Hi friends!
I have a Android head unit, I made a big mistake with sp flash tool.
I format whole flash and next this the head unit dead...

PC recocnize the head unit but i dont make nothing,only error 4032
i do memory test,give error 4032
i do readback,give error 4032
i do format,give error 4032
i do write memory,give error 4032
all give error 4032
uninstall-install drivers error 4032

before can format all works perfect,after format dead.
i dont know what can i do..

Sorry for my english.

If nothing works its your firmware issue try downloading another one for your device

saliks
Junior Member

17

30-04-2023, 06:09 AM

#16

Νow i tried spft v3-1332 and it gives me error 2005.
I'm looking for firmware but I can't find it anywhere, I only find update.

I can't figure out what happened after the format and it won't accept anything.

saliks
Junior Member

17

07-05-2023, 08:17 PM

#17

mtkclient give me "Preloader needed due to dram config"

...Port - Device detected Smile

Preloader - CPU: MT8163()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212c00
Preloader - Var1: 0xb1
Preloader - Disabling Watchdog...
Preloader - HW code: 0x8163
Preloader - Target config: 0x0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xcb00
Preloader - SW Ver: 0x1
Preloader - ME_ID: E2509F0A64DB335AE571179DA25910CF
DA_handler - Device is unprotected.
DA_handler - Device is in BROM-Mode. Bypassing security.
PLTools - Loading payload from mt8163_payload.bin, 0x258 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: C:\Users\ACER\Desktop\mtkclient-main\mtkclient\payloads\mt8163_payload.bin
Port - Device detected Smile

DA_handler
DA_handler - [LIB]: ←[33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.←[0m
DA_handler
DA_handler - [LIB]: ←[31mFailed to dump preloader from ram.←[0m
DALegacy - Uploading legacy da...
DALegacy - Uploading legacy stage 1 from MTK_AllInOne_DA_5.2136.bin
legacyext - Legacy DA2 is patched.
legacyext - Legacy DA2 CMD F0 is patched.
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info
DALegacy - Reading emmc info
DALegacy - ACK: 0402a1
DALegacy - Setting stage 2 config ...
DALegacy - DRAM config needed for : f4012241524a31315811f97117b379ab
DALegacy - Reading dram nand info ...
DALegacy
DALegacy - [LIB]: ←[31mPreloader needed due to dram config.←[0m

maxpayne
Intern

4,334

10-05-2023, 06:16 PM

#18

(07-05-2023, 08:17 PM)saliks mtkclient give me "Preloader needed due to dram config"

4032 either means you're using wrong firmware or you need to first flash preloader.bin only to the phone

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

saliks
Junior Member

17

11-05-2023, 04:52 AM

#19

I tried flashing the preloader.bin only but it gives me error 4032 again.
I have taken a full dump from the device, I am trying to flash with this firmware, I can't find anything else on the internet.

maxpayne
Intern

4,334

13-05-2023, 12:16 PM

#20

(11-05-2023, 04:52 AM)saliks I tried flashing the preloader.bin only but it gives me error 4032 again.
I have taken a full dump from the device, I am trying to flash with this firmware, I can't find anything else on the internet.

Where did you get this firmware from?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
2 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions