Hovatek Forum MOBILE Android Tecno Spark 5 pro bricked
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno Spark 5 pro bricked

Tecno Spark 5 pro bricked

29-11-2022, 08:49 PM
#1



BlushHello Hovatek team. i'm currently going trough a big problem with my Tecno KD7.
i was trying to root my phone in order to install a custom rom. i unlocked the bootloader with adb and fastboot commands. i then proceeded to flash twrp zip files and vmbeta files... it starts behaving abnormally. i run the command to relock bootloader then my device kept rebooting on logo with the messages. i then opened and disconnect and reconnect the battery but it will not flash all partitions.

 "red state your device has failed verification and may not work properly. please download boot image with correct signature or disable verified boot. your device will restart in 5 seconds"

i then headed to Hovatek forums for help and i downloaded the provided stock firmware present on Hovatek. i tried to flash with sp flash tool but i will encounter

 ERROR_STATUS_SEC_IMG_TYPE_MISMATCH (0x002002A)
HINT
verified boot is enabled.
please download signed image(tkv-verified.img)or disable verified boot.


when i tried to untick tkv.img partition i get another error message with another partition... dtbo; vbmeta, super and trans partitios respectively.
when i untick all of them, flash successful but device will not boot up. i don't know what to do and I'm dazed. this is my only phone and Iém sick now Dodgy  i trust in you hovatek to revive my device. 

Thanks for giving your time
justshez
justshez
justshez
Intern
1,818
30-11-2022, 11:30 AM
#2
(29-11-2022, 08:49 PM)English Advisor BlushHello Hovatek team. i'm currently going trough a big problem with my Tecno KD7.
i was trying to root my phone in order to install a custom rom. i unlocked the bootloader with adb and fastboot commands. i then proceeded to flash twrp zip files and vmbeta files... it starts behaving abnormally. i run the command to relock bootloader then my device kept rebooting on logo with the messages. i then opened and disconnect and reconnect the battery but it will not flash all partitions.

 "red state your device has failed verification and may not work properly. please download boot image with correct signature or disable verified boot. your device will restart in 5 seconds"

i then headed to Hovatek forums for help and i downloaded the provided stock firmware present on Hovatek. i tried to flash with sp flash tool but i will encounter

 ERROR_STATUS_SEC_IMG_TYPE_MISMATCH (0x002002A)
HINT
verified boot is enabled.
please download signed image(tkv-verified.img)or disable verified boot.


when i tried to untick tkv.img partition i get another error message with another partition... dtbo; vbmeta, super and trans partitios respectively.
when i untick all of them, flash successful but device will not boot up. i don't know what to do and I'm dazed. this is my only phone and Iém sick now Dodgy  i trust in you hovatek to revive my device. 

Thanks for giving your time

Flash firmware using MTK Client @ https://www.hovatek.com/forum/thread-40866.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
30-11-2022, 07:47 PM
#3
ok i will retry
01-12-2022, 08:53 AM
#4
Good morning the Team. I tried to flash the files using MtkClient method but i was getting error during flashing some files like boot, vbmetas and super files. previously, dtbo and tkv files refused to flash but in MtkClient these two files were succesfully flashed except the latter 3 files. i switched to Mtk Bypass method but i continue to have VERIFIED BOOT error in sp flash tool. which other option do i have? please help me
hovatek
hovatek
hovatek
Administrator
49,634
05-12-2022, 01:25 PM
#5



(01-12-2022, 08:53 AM)English Advisor Good morning the Team. I tried to flash the files using MtkClient method but i was getting error during flashing some files like boot, vbmetas and super files. previously, dtbo and tkv files refused to flash but in MtkClient these two files were succesfully flashed except the latter 3 files. i switched to Mtk Bypass method but i continue to have VERIFIED BOOT error in sp flash tool. which other option do i have? please help me

What was the error with boot, vbmeta and super

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
05-12-2022, 03:16 PM
#6
Good morning sir. The error message read. VERIFIED BOOT IS ENABLED as it used to give me. However, while leaving my phone to charge yesterday, I trier to flash with mtk client and everything was a success. Thank you so much for your kindness. May God give you more wisdom. May all of us be blessed.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl