Itel A17 W5006X locked+frp

[Please help] Itel A17 W5006X locked+frp

realcm
Enthusiastic Member

9

24-11-2022, 04:12 PM

#1

I got Itel A17 W5006X pattern lock + frp.
Phone is completely locked. No usb debug, no bootloader unlock or whatsoever.
No data avaliable to unlock..
I tried to flash with RDT 25 FDL1+FDL2+custom revocery.img
But it fails on finishing FDL2 with 31s timeout.

fastboot flashing unlock... - none of unlock commands worked.
fastboot boot recovery.img - error (too many links).
I changed usb cable, installed fresh usb drivers - but got the same error.

I need to save the phone, user data doesn't matter.
Please help.

justshez
Senior Member

2,505

25-11-2022, 08:30 AM

#2

(24-11-2022, 04:12 PM)realcm I got Itel A17 W5006X pattern lock + frp.
Phone is completely locked. No usb debug, no bootloader unlock or whatsoever.
No data avaliable to unlock..
I tried to flash with RDT 25 FDL1+FDL2+custom revocery.img
But it fails on finishing FDL2 with 31s timeout.

fastboot flashing unlock... - none of unlock commands worked.
fastboot boot recovery.img - error (too many links).
I changed usb cable, installed fresh usb drivers - but got the same error.

I need to save the phone, user data doesn't matter.
Please help.

Refer to
https://www.hovatek.com/forum/thread-32044.html

realcm
Enthusiastic Member

9

25-11-2022, 12:58 PM

#3

(25-11-2022, 08:30 AM)Abdulakeem14
(24-11-2022, 04:12 PM)realcm I got Itel A17 W5006X pattern lock + frp.
Phone is completely locked. No usb debug, no bootloader unlock or whatsoever.
No data avaliable to unlock..
I tried to flash with RDT 25 FDL1+FDL2+custom revocery.img
But it fails on finishing FDL2 with 31s timeout.

fastboot flashing unlock... - none of unlock commands worked.
fastboot boot recovery.img - error (too many links).
I changed usb cable, installed fresh usb drivers - but got the same error.

I need to save the phone, user data doesn't matter.
Please help.
Refer to
https://www.hovatek.com/forum/thread-32044.html

I did everything according to instruction.
ResearchDownload R23.0.0001
But I got error _REPARTITION_ failed: unknown error.

I unchecked "Repartition" box in settings.
But now I got another error: _E_persist_ failed: unknown error.

realcm
Enthusiastic Member

9

25-11-2022, 02:44 PM

#4

This Itel A17 has v18 firmware.
But I use found in the Internet v31 firmware.
May be I need exactly v18 firmware to erase persist partition?

Please if anybody has it, gimme that.

justshez
Senior Member

2,505

26-11-2022, 04:31 AM

#5

(25-11-2022, 02:44 PM)realcm This Itel A17 has v18 firmware.
But I use found in the Internet v31 firmware.
May be I need exactly v18 firmware to erase persist partition?

Please if anybody has it, gimme that.

First unlock bootloader using this method
https://www.hovatek.com/forum/thread-32287.html
Remove FRP using fastboot @ https://www.hovatek.com/forum/thread-18581.html

realcm
Enthusiastic Member

9

28-11-2022, 07:16 AM

#6

(26-11-2022, 04:31 AM)Abdulakeem14
(25-11-2022, 02:44 PM)realcm This Itel A17 has v18 firmware.
But I use found in the Internet v31 firmware.
May be I need exactly v18 firmware to erase persist partition?

Please if anybody has it, gimme that.
First unlock bootloader using this method
https://www.hovatek.com/forum/thread-32287.html
Remove FRP using fastboot @ https://www.hovatek.com/forum/thread-18581.html

Did as you told me.
Successfully got identifier token.
But then I got the error:

downloading 'unlock_message'...
OKAY [ 0.004s]
unlocking bootloader...
FAILED (remote: Unlock bootloader fail.)
finished. total time: 0.121s

realcm
Enthusiastic Member

9

28-11-2022, 07:45 AM

#7

Thouhg I could use modified fastboot to boot with ../fastboot boot twrp2.8.img
but ended up with error: No such device.

hovatek
Administrator

49,887

04-12-2022, 11:30 AM

#8

(24-11-2022, 04:12 PM)realcm I got Itel A17 W5006X pattern lock + frp.
Phone is completely locked. No usb debug, no bootloader unlock or whatsoever.
No data avaliable to unlock..
I tried to flash with RDT 25 FDL1+FDL2+custom revocery.img
But it fails on finishing FDL2 with 31s timeout.

fastboot flashing unlock... - none of unlock commands worked.
fastboot boot recovery.img - error (too many links).
I changed usb cable, installed fresh usb drivers - but got the same error.

I need to save the phone, user data doesn't matter.
Please help.

Use v22 and follow https://www.hovatek.com/forum/thread-32284.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

realcm
Enthusiastic Member

9

09-12-2022, 10:33 AM

#9

(04-12-2022, 11:30 AM)hovatek
(24-11-2022, 04:12 PM)realcm I got Itel A17 W5006X pattern lock + frp.
Phone is completely locked. No usb debug, no bootloader unlock or whatsoever.
No data avaliable to unlock..
I tried to flash with RDT 25 FDL1+FDL2+custom revocery.img
But it fails on finishing FDL2 with 31s timeout.

fastboot flashing unlock... - none of unlock commands worked.
fastboot boot recovery.img - error (too many links).
I changed usb cable, installed fresh usb drivers - but got the same error.

I need to save the phone, user data doesn't matter.
Please help.

Use v22 and follow https://www.hovatek.com/forum/thread-32284.html

All good, but I don't have the dump of A17 W5006X files required. Confused

Requirements:
[*]prodnv.img and persist.img backed up from a working device of the same model

hovatek
Administrator

49,887

12-12-2022, 08:34 AM

#10

(09-12-2022, 10:33 AM)realcm All good, but I don't have the dump of A17 W5006X files required.

Requirements:
[*]prodnv.img and persist.img backed up from a working device of the same model

Download the pac file and use those from it

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions