Hovatek Forum MOBILE Android [Please help] Teclast P10 HD Unisoc SC9863A. Black Screen, checking baudrate, bricked?
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Teclast P10 HD Unisoc SC9863A. Black Screen, checking baudrate, bricked?

[Please help] Teclast P10 HD Unisoc SC9863A. Black Screen, checking baudrate, bricked?

n3tox20
n3tox20
n3tox20
Enthusiastic Member
5
19-10-2022, 06:50 AM
#1



Hi guys, I need your help. 
I wanted to update my old tablet Teclast P10HD EEA with Unisoc SC9863A
I followed the instruction from manufacturer website (from this zip)- installed drivers, opened firmware pak file and hit flash while holding vol down button. 
After that I was getting different error messages User Canceled (No I didnt), Filed to flash etc. 

Now the tablet is not turning on, I can't flash it by Teclast older tool or never SPD Research Tool R25.20.3901 from here.
I get Checking Baudrate - Waiting message only.  

Device is visible under COM Ports in Windows as a SPRD U25 Diag not sure if I have correct drivers installed. 

Please point me to any direction because I have no idea what to do now with this brick.
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
19-10-2022, 02:48 PM
#2
(19-10-2022, 06:50 AM)n3tox20 Hi guys, I need your help. 
I wanted to update my old tablet Teclast P10HD EEA with Unisoc SC9863A
I followed the instruction from manufacturer website (from this zip)- installed drivers, opened firmware pak file and hit flash while holding vol down button. 
After that I was getting different error messages User Canceled (No I didnt), Filed to flash etc. 

Now the tablet is not turning on, I can't flash it by Teclast older tool or never SPD Research Tool R25.20.3901 from here.
I get Checking Baudrate - Waiting message only.  

Device is visible under COM Ports in Windows as a SPRD U25 Diag not sure if I have correct drivers installed. 

Please point me to any direction because I have no idea what to do now with this brick.

See @ https://www.hovatek.com/forum/thread-808.html
n3tox20
n3tox20
n3tox20
Enthusiastic Member
5
19-10-2022, 02:56 PM
#3
(19-10-2022, 02:48 PM)Abdulakeem14
(19-10-2022, 06:50 AM)n3tox20 Hi guys, I need your help..

See @ https://www.hovatek.com/forum/thread-808.html

Thanks for your reply. I will definetely read this. I did some resarch on my own but no luck getting flashing my device. 
I installed bunch of different drivers, don't even know if I have the correct ones right now. Is my device properly seen by Windows?
Some people suggest to drain the battery or unplug it. But its not easy to open this device for me. I tried. I was at 87% or something when the flash failed so waiting untill it gets to 0% on turned off device could take weeks.
Gargoyle
Gargoyle
Gargoyle
Contributor
464
19-10-2022, 06:53 PM
#4
They are quite easy to open, just a piece of plastic, they are not glued, just clicked into the hinge.
The battery is connected to the mainboard with a connector.
https://youtu.be/HDo-tmVRIPY?t=35

I think you have the correct drivers "SPRD U2S Diag"
Try an older version of the SPD Research Tool R21.0.0001
The battery does not need to be connected during flashing if you check Keep Charge in the Research Tool settings.
This post was last modified: 19-10-2022, 07:14 PM by Gargoyle.
n3tox20
n3tox20
n3tox20
Enthusiastic Member
5
19-10-2022, 07:38 PM
#5



oh thank you so much for the video i coudnt find anything by myself. I actually made the diode hack to drain the battery but I will try to open it again.
n3tox20
n3tox20
n3tox20
Enthusiastic Member
5
19-10-2022, 08:17 PM
#6
Oh i wasnt so hard when you know how to do it! Thank you Gargoyle! Battery was actually soldered but I desoldered it and sucessfully flashed the firmware via Upgrade Tool from Teclast website. version R25 that I have from here still wasn't working. Currently tablet is alive!
hovatek
hovatek
hovatek
Administrator
49,570
24-10-2022, 06:53 PM
#7
(19-10-2022, 08:17 PM)n3tox20 Oh i wasnt so hard when you know how to do it! Thank you Gargoyle! Battery was actually soldered but I desoldered it and sucessfully flashed the firmware via Upgrade Tool from Teclast website. version R25 that I have from here still wasn't working. Currently tablet is alive!

Could you share the zip of the version that worked for you
This post was last modified: 24-10-2022, 06:54 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
n3tox20
n3tox20
n3tox20
Enthusiastic Member
5
27-10-2022, 12:40 PM
#8
Sure, sorry for late answer
Here is the link to the software from official Teclast website
https://1drv.ms/u/s!AtprAlErUyChjyjUpmI1...n?e=e4zL9l
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram