Hovatek Forum MOBILE Android Gionee stuck in edl mode
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Gionee stuck in edl mode

Gionee stuck in edl mode

Gee12
Gee12
Gee12
Newbie
3
08-10-2022, 01:27 AM
#1



So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.
justshez
justshez
justshez
Intern
1,801
08-10-2022, 04:06 PM
#2
(08-10-2022, 01:27 AM)Gee12 So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.
Try disconnecting/reconnecting the battery

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
hovatek
hovatek
hovatek
Administrator
49,617
10-10-2022, 06:20 AM
#3
(08-10-2022, 01:27 AM)Gee12 So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.

You have to get it into EDL (9008) and reflash the firmware (assuming its not an emmc issue)

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gee12
Gee12
Gee12
Newbie
3
17-10-2022, 08:23 PM
#4
(08-10-2022, 04:06 PM)Abdulakeem14
(08-10-2022, 01:27 AM)Gee12 So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.
Try disconnecting/reconnecting the battery

tried that but there was no change
Gee12
Gee12
Gee12
Newbie
3
17-10-2022, 08:24 PM
#5



(10-10-2022, 06:20 AM)hovatek
(08-10-2022, 01:27 AM)Gee12 So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.

You have to get it into EDL (9008) and reflash the firmware (assuming its not an emmc issue)
how do i do that?
justshez
justshez
justshez
Intern
1,801
23-10-2022, 07:54 AM
#6
(17-10-2022, 08:24 PM)Gee12
(10-10-2022, 06:20 AM)hovatek
(08-10-2022, 01:27 AM)Gee12 So my gionee m7 power (gn5007) went into encryption unsuccessful after reboot in recovery mode so tried flashing the firmware it loaded successfuly but there was no change. I tried the second time but after that it would not switch on but went from qualcoom hs usb qd loader to qualcoom hs usb diagnostics 900e mode.please your help on what I should do will be sincerely appreciated.

You have to get it into EDL (9008) and reflash the firmware (assuming its not an emmc issue)
how do i do that?

Refer to https://www.hovatek.com/forum/thread-22466.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl