[Please help] bricked OPPO Reno2 Z
[Please help] bricked OPPO Reno2 Z
(08-09-2022, 03:14 PM)ORZpasserAtw One day I thought I can root OPPO Reno2 Z(CPH1951)Try using MTK Client @ https://www.hovatek.com/forum/thread-40866.html
I flashed wrong magisk'd boot.img, it shows corrupt boot/recovery.
then I flashed back ROM(CPH1951_11_F.58_2021070921000137) that I found on internet, wifi not working.
then I accidentally used "Format All + Download" on SP flash tool, it throw error can't flash "opporeserve2"
now screen isn't working I can only access MTK VCOM, recovery is died.
I also follow this tutorial but I don't have PGPT file
F:\DOWNLOAD\mtkclient-main\mtkclient-main>python mtk w boot,opporeserve2,recovery,vbmeta boot.img,opporeserve2.img,recovery.img,vbmeta.img
MTK Flash/Exploit Client V1.5.9 (c) B.Kerler 2018-2022
Preloader - Status: Waiting for PreLoader VCOM, please connect mobile
Port - Hint:
Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.
...........
Port - Hint:
Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.
...........
Port - Hint:
Power off the phone before connecting.
For brom mode, press and hold vol up, vol dwn, or all hw buttons and connect usb.
For preloader mode, don't press any hw button and connect usb.
If it is already connected and on, hold power for 10 seconds to reset.
...........
Port - Device detected :)
Preloader - CPU: MT6779(Helio P90 k79v1)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xa
Preloader - Disabling Watchdog...
Preloader - HW code: 0x725
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True
Preloader - Get Target info
Preloader - BROM mode detected.
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca01
Preloader - SW Ver: 0x0
Preloader - ME_ID: 5B66C6B8691A881D5B1775A0CCF26027
Preloader - SOC_ID: F74A56D27CDC8B3CB62D8304D2CD5992A1F646DB79A067C6F74AAF16383623CF
PLTools - Loading payload from mt6779_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: F:\DOWNLOAD\mtkclient-main\mtkclient-main\mtkclient\payloads\mt6779_payload.bin
Port - Device detected :)
DA_handler - Device is protected.
DA_handler - Device is in BROM mode. Trying to dump preloader.
DAXFlash - Uploading xflash stage 1 from oppo_2_MTK_AllInOne_DA.bin
xflashext - Patching da1 ...
Mtk
Mtk - [LIB]: Failed to patch preloader security
Mtk - Patched "get_vfy_policy" in preloader
xflashext - Patching da2 ...
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DAXFlash - Successfully received DA sync
DAXFlash - UFS FWVer: 0x30
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: KM8V7001JM-B81
DAXFlash - UFS CID: ce014b4d3856373030314a4d2d423831
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - DRAM config needed for : ce014b4d3856373030314a4d2d423831
DAXFlash - Sending emi data ...
DAXFlash - DRAM setup passed.
DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - Successfully uploaded stage 2
DAXFlash - UFS FWVer: 0x30
DAXFlash - UFS Blocksize:0x1000
DAXFlash - UFS ID: KM8V7001JM-B81
DAXFlash - UFS CID: ce014b4d3856373030314a4d2d423831
DAXFlash - UFS LU0 Size: 0x1dcb000000
DAXFlash - UFS LU1 Size: 0x400000
DAXFlash - UFS LU2 Size: 0x400000
DAXFlash - HW-CODE : 0x725
DAXFlash - HWSUB-CODE : 0x8A00
DAXFlash - HW-VERSION : 0xCA01
DAXFlash - SW-VERSION : 0x0
DAXFlash - CHIP-EVOLUTION : 0x0
DAXFlash - DA-VERSION : 1.0
DAXFlash - Upload data was accepted. Jumping to stage 2...
DAXFlash - DA Extensions successfully added
Done |--------------------------------------------------| 0.0% Write (Sector 0x0Progress: |███-----------------------------------------------| 6.2% Write (SectoProgress: |██████--------------------------------------------| 12.5% Write (SectProgress: |█████████-----------------------------------------| 18.8% Write (SectProgress: |████████████--------------------------------------| 25.0% Write (SectProgress: |████████████████----------------------------------| 31.2% Write (SectProgress: |███████████████████-------------------------------| 37.5% Write (SectProgress: |██████████████████████----------------------------| 43.8% Write (SectProgress: |█████████████████████████-------------------------| 50.0% Write (SectProgress: |████████████████████████████----------------------| 56.2% Write (SectProgress: |███████████████████████████████-------------------| 62.5% Write (SectProgress: |██████████████████████████████████----------------| 68.8% Write (SectProgress: |██████████████████████████████████████------------| 75.0% Write (SectProgress: |█████████████████████████████████████████---------| 81.2% Write (SectProgress: |████████████████████████████████████████████------| 87.5% Write (SectProgress: |███████████████████████████████████████████████---| 93.8% Write (SectProgress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x10000 of 0x10000, ) 4.97 MB/s
Wrote boot.img to sector 200448 with sector count 8192.
Done |--------------------------------------------------| 0.0% Write (Sector 0x0Progress: |████████████████████------------------------------| 39.6% Write (SectProgress: |████████████████████████████████████████----------| 79.1% Write (SectProgress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x2871 of 0x2871, ) 5.02 MB/s
Wrote opporeserve2.img to sector 18696 with sector count 16384.
Done |--------------------------------------------------| 0.0% Write (Sector 0x0Progress: |██------------------------------------------------| 3.1% Write (SectoProgress: |███-----------------------------------------------| 6.2% Write (SectoProgress: |█████---------------------------------------------| 9.4% Write (SectoProgress: |██████--------------------------------------------| 12.5% Write (SectProgress: |████████------------------------------------------| 15.6% Write (SectProgress: |█████████-----------------------------------------| 18.8% Write (SectProgress: |███████████---------------------------------------| 21.9% Write (SectProgress: |████████████--------------------------------------| 25.0% Write (SectProgress: |██████████████------------------------------------| 28.1% Write (SectProgress: |████████████████----------------------------------| 31.2% Write (SectProgress: |█████████████████---------------------------------| 34.4% Write (SectProgress: |███████████████████-------------------------------| 37.5% Write (SectProgress: |████████████████████------------------------------| 40.6% Write (SectProgress: |██████████████████████----------------------------| 43.8% Write (SectProgress: |███████████████████████---------------------------| 46.9% Write (SectProgress: |█████████████████████████-------------------------| 50.0% Write (SectProgress: |███████████████████████████-----------------------| 53.1% Write (SectProgress: |████████████████████████████----------------------| 56.2% Write (SectProgress: |██████████████████████████████--------------------| 59.4% Write (SectProgress: |███████████████████████████████-------------------| 62.5% Write (SectProgress: |█████████████████████████████████-----------------| 65.6% Write (SectProgress: |██████████████████████████████████----------------| 68.8% Write (SectProgress: |████████████████████████████████████--------------| 71.9% Write (SectProgress: |██████████████████████████████████████------------| 75.0% Write (SectProgress: |███████████████████████████████████████-----------| 78.1% Write (SectProgress: |█████████████████████████████████████████---------| 81.2% Write (SectProgress: |██████████████████████████████████████████--------| 84.4% Write (SectProgress: |████████████████████████████████████████████------| 87.5% Write (SectProgress: |█████████████████████████████████████████████-----| 90.6% Write (SectProgress: |███████████████████████████████████████████████---| 93.8% Write (SectProgress: |████████████████████████████████████████████████--| 96.9% Write (SectProgress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x20000 of 0x20000, ) 5.14 MB/s
Wrote recovery.img to sector 8 with sector count 16384.
Done |--------------------------------------------------| 0.0% Write (Sector 0x0Progress: |██████████████████████████████████████████████████| 100.0% Write (Sector 0x8 of 0x8, ) 0.30 MB/s
Wrote vbmeta.img to sector 57096 with sector count 2048.