Hovatek Forum MOBILE Android Tecno pouvoir 4 pro got bricked surprisingly
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno pouvoir 4 pro got bricked surprisingly

Tecno pouvoir 4 pro got bricked surprisingly

sir_bidex
sir_bidex
sir_bidex
Techie Member
56
16-08-2022, 10:04 PM
#1



Hi great admin! Pls I really need help. My phone was fine before going to bed but woke up to see it bricked when it was about to auto on.  What could be the cause? I've tried to flash it and I got this
ERror: status_brom_cmd_send_da_fail
justshez
justshez
justshez
Intern
1,818
17-08-2022, 01:23 PM
#2
(16-08-2022, 10:04 PM)sir_bidex Hi great admin! Pls I really need help. My phone was fine before going to bed but woke up to see it bricked when it was about to auto on.  What could be the cause? I've tried to flash it and I got this
ERror: status_brom_cmd_send_da_fail

flashback the right firmware build using SP flashtool
DA @ Tecno MTK Secure Boot Download Agent (DA) loader files (hovatek.com)

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
sir_bidex
sir_bidex
sir_bidex
Techie Member
56
19-08-2022, 01:12 PM
#3
I downloaded the DA for my pouvoir 4 Pro both LC8 and LC7. The response was DA not compatible. So I tried to flash it again with spflashtool DA and this is what I got
ERROR: STATUS_BROM_CMD__STARTCMD.(0×C006001)
Hint;
Please retry the operation
1) remove the battery and USB cable
2) press download button on the flashtool
3)pressing download volume down and plug in USB cable and download without battery.

Pls brother, what I am going to do when the battery is in-built
maxpayne
maxpayne
maxpayne
Intern
3,628
22-08-2022, 08:43 AM
#4
(19-08-2022, 01:12 PM)sir_bidex I downloaded the DA for my pouvoir 4 Pro both LC8 and LC7. The response was DA not compatible. So I tried to flash it again with spflashtool DA and this is what I got
ERROR: STATUS_BROM_CMD__STARTCMD.(0×C006001)
Hint;
Please retry the operation
1)  remove the battery and USB cable
2) press download button on the flashtool
3)pressing download volume down and plug in USB cable and download without battery.

Pls brother, what I am going to do when the battery is in-built

Flash with mtk bypass guide https://www.hovatek.com/forum/thread-37957.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gbemiga41
Gbemiga41
Gbemiga41
Newbie
1
09-10-2022, 05:29 AM
#5



Well done Admin
Please, my tecno pouvoir 4 pro got stucked at bootloop, but now, it is not coming on at all. It just show that it's charging whenever I connect charger or USB cable.
I have not rooted it neither tweaked it
That's the factory rom.
I cant even boot into recovery to factory reset.
I tried to flash with SP flashtool, but it's not detected by the PC. I tried to get the build number via Miraclebox, but it shows "hold on to connect to phone" and it's not progressing beyond that.
Please help!
hovatek
hovatek
hovatek
Administrator
49,634
10-10-2022, 06:25 AM
#6
(09-10-2022, 05:29 AM)Gbemiga41 Well done Admin
Please, my tecno pouvoir 4 pro got stucked at bootloop, but now, it is not coming on at all. It just show that it's charging whenever I connect charger or USB cable.
I have not rooted it neither tweaked it
That's the factory rom.
I cant even boot into recovery to factory reset.
I tried to flash with SP flashtool, but it's not detected by the PC. I tried to get the build number via Miraclebox, but it shows "hold on to connect to phone" and it's not progressing beyond that.
Please help!

Create a thread by clicking Ask Question at the top

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl