Hovatek Forum MOBILE Android [Please help] Phone not turning on after failed readback on SP flash tool ! What to do ?
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Phone not turning on after failed readback on SP flash tool ! What to do ?

[Please help] Phone not turning on after failed readback on SP flash tool ! What to do ?

someone2305
someone2305
someone2305
Techie Member
63
07-08-2022, 01:11 PM
#1



Hey guys , 

I was attempting a complete rom dump of my phone ,  using the WWR method as per the video mentioned , but for some reason , during the first readback , a error came and process ended ,  so I disconnected my phone to check if it was still functioning and sadly it did  not power on anymore ! This is a big problem because it wasn't even getting detected in the computer using in the after pressing the volume up key and connecting the cable . So , I can't even reflash the firmware . What should I do to either just get it back on or reflash(worst case scenario) . Please let me know .

Any help appreciated !
justshez
justshez
justshez
Intern
1,801
07-08-2022, 06:42 PM
#2
(07-08-2022, 01:11 PM)someone2305 Hey guys , 

I was attempting a complete rom dump of my phone ,  using the WWR method as per the video mentioned , but for some reason , during the first readback , a error came and process ended ,  so I disconnected my phone to check if it was still functioning and sadly it did  not power on anymore ! This is a big problem because it wasn't even getting detected in the computer using in the after pressing the volume up key and connecting the cable . So , I can't even reflash the firmware . What should I do to either just get it back on or reflash(worst case scenario) . Please let me know .

Any help appreciated !
It's stuck in preloader mode, you can disconnected / reconnect the battery or leave plugged in for about 24 hours

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
someone2305
someone2305
someone2305
Techie Member
63
07-08-2022, 06:43 PM
#3
(07-08-2022, 06:42 PM)Abdulakeem14
(07-08-2022, 01:11 PM)someone2305 Hey guys , 

I was attempting a complete rom dump of my phone ,  using the WWR method as per the video mentioned , but for some reason , during the first readback , a error came and process ended ,  so I disconnected my phone to check if it was still functioning and sadly it did  not power on anymore ! This is a big problem because it wasn't even getting detected in the computer using in the after pressing the volume up key and connecting the cable . So , I can't even reflash the firmware . What should I do to either just get it back on or reflash(worst case scenario) . Please let me know .

Any help appreciated !
It's stuck in preloader mode, you can disconnected / reconnect the battery or leave plugged in for about 24 hours
Thanks ! That worked ! I disconnected the battery and plugged it back in and it instantly booted back again ! 

Appreciate the help !
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl