[Peter0N]

The first time I tried to flash the phone, I got the "STATUS_SEC_INSUFFICIENT_BUFFER" error during the flashing and after that the phone was only vibrating. Then when I tried to flash it again I got the "S_BROM_CMD_STARTCMD_FAIL (0xC0060001)" error. Using the hint (hold volume down and connect) and skipping the three files (sutinfo, systeminfo, cda), I was able to flash again. It is very slow, I thought it gets stuck on the "Downloading DA" at 100% but when I left it connected, the flashing resumes. It takes over 30 mins to flash but succeeds. After this the phone is now stuck on "No command" screen. I tried wiping data in the recovery menu. When I view the recovery.log the last lines there are "[libfs_mgr]Error finding 'slot' in device tree".

[maxpayne]

The first time I tried to flash the phone, I got the "STATUS_SEC_INSUFFICIENT_BUFFER" error during the flashing and after that the phone was only vibrating. Then when I tried to flash it again I got the "S_BROM_CMD_STARTCMD_FAIL (0xC0060001)" error. Using the hint (hold volume down and connect) and skipping the three files (sutinfo, systeminfo, cda), I was able to flash again. It is very slow, I thought it gets stuck on the "Downloading DA" at 100% but when I left it connected, the flashing resumes. It takes over 30 mins to flash but succeeds. After this the phone is now stuck on "No command" screen. I tried wiping data in the recovery menu. When I view the recovery.log the last lines there are "[libfs_mgr]Error finding 'slot' in device tree".

Try to flash only the partitions that you skipped, untick the rest

[Peter0N]

Try to flash only the partitions that you skipped, untick the rest

Thanks for the response. I can't flash the skipped partitions because I get the verified/secure boot error. I tried to use MTK bypass but it doesn't work, this is what I get:

Code:

[2022-07-30 11:35:54.195698] Waiting for device
[2022-07-30 11:35:59.658833] Found device = 0e8d:0003

[2022-07-30 11:36:00.083672] Device hw code: 0x326
[2022-07-30 11:36:00.088750] Device hw sub code: 0x8a00
[2022-07-30 11:36:00.088750] Device hw version: 0xcb00
[2022-07-30 11:36:00.088750] Device sw version: 0x1
[2022-07-30 11:36:00.088750] Device secure boot: True
[2022-07-30 11:36:00.088750] Device serial link authorization: False
[2022-07-30 11:36:00.088750] Device download agent authorization: False

[2022-07-30 11:36:00.088750] Disabling watchdog timer
[2022-07-30 11:36:00.098531] Insecure device, sending payload using send_da
[2022-07-30 11:36:00.148661] Found send_dword, dumping bootrom to bootrom_326.bin

then the phone turns on into the "no command" screen.

[Peter0N]

I found a firmware that didn't have the "slot" errors in the recovery.log so I decided to format the flash and flashed it (without the 3 partitions) and now it is finally working again!