[KhoDialga]

Hello, exactly as the subject says. After attempting to restore the IMEI of my phone after it got lost after I revived my phone, it got bricked once again. That happened on last tuesday, and it's now 3am on sunday. Right after the phone got bricked again, I left the battery draining until MTK bypass could recognize it again. It got recognized, and I pulled up SP Flash Tool once more. This time it would throw the DA_HASH_MISMATCH error, specifically the one starting with -10. I've been trying to use different DA files and I tried using an auth file as well, I'm also trying to format the stock MIUI 12.5 as well. What should I do now? Should I leave the battery draining for more time? Or is my phone dead for good this time? I also tried disconnecting the battery last time, but a bunch of stripped screws were in there, and I don't have the tools to remove them. Thanks for your help.

[Abdulakeem14]

Hello, exactly as the subject says. After attempting to restore the IMEI of my phone after it got lost after I revived my phone, it got bricked once again. That happened on last tuesday, and it's now 3am on sunday. Right after the phone got bricked again, I left the battery draining until MTK bypass could recognize it again. It got recognized, and I pulled up SP Flash Tool once more. This time it would throw the DA_HASH_MISMATCH error, specifically the one starting with -10. I've been trying to use different DA files and I tried using an auth file as well, I'm also trying to format the stock MIUI 12.5 as well. What should I do now? Should I leave the battery draining for more time? Or is my phone dead for good this time? I also tried disconnecting the battery last time, but a bunch of stripped screws were in there, and I don't have the tools to remove them. Thanks for your help.

Are you flashing the right firmware build?

[KhoDialga]

Are you flashing the right firmware build?

I'm pretty sute I am, since I used the same firmware files to unbrick my phone a while ago.

[Abdulakeem14]

Are you flashing the right firmware build?

I'm pretty sute I am, since I used the same firmware files to unbrick my phone a while ago.

How did the imei got damaged?
Was the baseband known or unknown?

[KhoDialga]

How did the imei got damaged?
Was the baseband known or unknown?

I don't know how the imei got damaged, since when I checked the phone deteced baseband

[maxpayne]

I don't know how the imei got damaged, since when I checked the phone deteced baseband

Why don't you flash firmware with mtk client or mtk bypass
https://www.hovatek.com/forum/thread-40866.html
https://www.hovatek.com/forum/thread-37957.html

[KhoDialga]

Why don't you flash firmware with mtk client or mtk bypass
https://www.hovatek.com/forum/thread-40866.html
https://www.hovatek.com/forum/thread-37957.html

I was already using mtk bypass while trying to flash it, and using mtkclient gives me the same error.

[Abdulakeem14]

Why don't you flash firmware with mtk client or mtk bypass
https://www.hovatek.com/forum/thread-40866.html
https://www.hovatek.com/forum/thread-37957.html

I was already using mtk bypass while trying to flash it, and using mtkclient gives me the same error.

Give an engineer to disassemble the phone, disconnect / reconnect the battery and try flashing again

[KhoDialga]

I decided to leave my phone charging for a few days, and then left it discharging for another 3 days, and I no longer get the status_da_hash_mismatch error on spflashtool, however, once I start flashing, spflashtool gets stuck on Downloading DA %100 and after 2 minutes, it throws the status_ext_ram_exception error. And when using mtk-client it still gives the old error, but with the code 0xc0070004.七十

[maxpayne]

I decided to leave my phone charging for a few days, and then left it discharging for another 3 days, and I no longer get the status_da_hash_mismatch error on spflashtool, however, once I start flashing, spflashtool gets stuck on Downloading DA %100 and after 2 minutes, it throws the status_ext_ram_exception error. And when using mtk-client it still gives the old error, but with the code 0xc0070004.七十

Use the mtk client gui and then share screenshot of any error you get