[adithxv]

Hello Hovatek members,

I have a Vivo V11i(MT6771), which is almost dead, because I flashed wrong firmware in it. Now I say almost dead because, it is detected by the computer (connects and disconnects). It shows MediaTek USB Port. For now I have used the MCT bypass tool to make it stable, and tried to flash firmware using SP flash tool. But, it always gets stuck at "DA download 100%", full red bar, and never goes beyond that. I am suspecting that it is due to the DA file, which I am using the already included one in SP flash (MTK_Allinone). But, I have searched the whole internet and cannot find the DA and/or Auth file for this particular model. Please help! I am trying to revive this phone for many weeks now.

[Abdulakeem14]

Hello Hovatek members,

I have a Vivo V11i(MT6771), which is almost dead, because I flashed wrong firmware in it. Now I say almost dead because, it is detected by the computer (connects and disconnects). It shows MediaTek USB Port. For now I have used the MCT bypass tool to make it stable, and tried to flash firmware using SP flash tool. But, it always gets stuck at "DA download 100%", full red bar, and never goes beyond that. I am suspecting that it is due to the DA file, which I am using the already included one in SP flash (MTK_Allinone). But, I have searched the whole internet and cannot find the DA and/or Auth file for this particular model. Please help! I am trying to revive this phone for many weeks now.

use mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
or flash with mtk client @ https://www.hovatek.com/forum/thread-40866.html

[adithxv]

@Abdulkaleem14,

Thank you. But I am getting an error, and I can't understand it. I have attached it:

[hovatek]

@Abdulkaleem14,

Thank you. But I am getting an error, and I can't understand it. I have attached it:

Try in MTK bypass and share the output

[adithxv]

I first successfully bypassed using MCT, and then used SP Flash Tool (UART, 921600). It gets stuck at Download DA 100%, a filled red bar, and gives an error. This happens in every port I have and all cables. I have attached the screens

[Abdulakeem14]

I first successfully bypassed using MCT, and then used SP Flash Tool (UART, 921600). It gets stuck at Download DA 100%, a filled red bar, and gives an error. This happens in every port I have and all cables. I have attached the screens

Change SP flashtool settings from (UART, 921600) to Highspeed USB

[adithxv]

I tried the option you mentioned, again the same error and red bar (DA 100%). SS attached

[hovatek]

I tried the option you mentioned, again the same error and red bar (DA 100%). SS attached

Do you have both mtkclient and mtk bypass set up?
Let me see the output with MTK bypass @ https://www.hovatek.com/forum/thread-37957.html