Flash GSI on SPD UNISOC 9863a Device- Gionee Max

[atulnakul121]

Does there is any guide that how to flash gsi on Gionee Max running spreadtrum 9863a or how to root it . Anyway i.e. using laptop or phone .

[hovatek]

Does there is any guide that how to flash gsi on Gionee Max running spreadtrum 9863a or how to root it . Anyway i.e. using laptop or phone .

I doubt https://www.hovatek.com/forum/thread-32287.html would work.
Do you have the pac file?

[atulnakul121]

Yes I have unlocked bootloader. I have unlocked it using your thread.How to flash GSI. I also have pac file. https://firmwarefile.com/gionee-max

[atulnakul121]

Please reply ?
Waiting for your response

[Abdulakeem14]

Please reply ?
Waiting for your response

Flash the system image using fastboot, then factory reset,
Also flash magisk patched boot.img

[atulnakul121]

I tried to flash system but it says data too large how resolve it . Also when I tried to flash magisk patched image same error encountered. Thnks in advance. If you could build or port twrp. I will send pac link to him who will help me ️

[hovatek]

I tried to flash system but it says data too large how resolve it . Also when I tried to flash magisk patched image same error encountered. Thnks in advance. If you could build or port twrp. I will send pac link to him who will help me ️

Try flashing in fastbootd

[Gargoyle]

Have a nice day,

The last time I tried to flash GSI into a device with the s9863a chipset, after reading the various forums, which states, among other things, to delete the product partition, after flash gsi the system did not boot.

So in the end you had to do a repack of super.img, where I left product.img, but just an empty file, replaced system.img with gsi, I also had to modify build.prop to start it at all.

I can create a pac file with gsi, but ... it won't be today: D I don't have that much time.

[atulnakul121]

Please reply ?
Waiting for your response

Flash the system image using fastboot, then factory reset,
Also flash magisk patched boot.img

I flash but it results in bootloop and I also try to flash blank vbmeta and try to disable verification but it fastboot stucked at writing vbmeta

[atulnakul121]

Have a nice day,

The last time I tried to flash GSI into a device with the s9863a chipset, after reading the various forums, which states, among other things, to delete the product partition, after flash gsi the system did not boot.

So in the end you had to do a repack of super.img, where I left product.img, but just an empty file, replaced system.img with gsi, I also had to modify build.prop to start it at all.

I can create a pac file with gsi, but ... it won't be today: D I don't have that much time

Ahh so assist me how to do that and will flashing with twrp work if works then please build it I will send recovery.img . And I am unable to check partition details as some apps shows it is A only and some A/B.