Hovatek Forum DEVELOPMENT Android Flash GSI on SPD UNISOC 9863a Device- Gionee Max
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Flash GSI on SPD UNISOC 9863a Device- Gionee Max

Flash GSI on SPD UNISOC 9863a Device- Gionee Max

Pages (3): 1 2 3 Next
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
08-04-2022, 12:08 PM
#1



Does there is any guide that how to flash gsi on Gionee Max running spreadtrum 9863a or how to root it . Anyway i.e. using laptop or phone .
hovatek
hovatek
hovatek
Administrator
49,570
09-04-2022, 09:07 AM
#2
(08-04-2022, 12:08 PM)atulnakul121 Does there is any guide that how to flash gsi on Gionee Max running spreadtrum 9863a or how to root it . Anyway i.e. using laptop or phone .

I doubt https://www.hovatek.com/forum/thread-32287.html would work.
Do you have the pac file?
This post was last modified: 09-04-2022, 09:07 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
09-04-2022, 11:12 AM
#3
Yes I have unlocked bootloader. I have unlocked it using your thread.How to flash GSI. I also have pac file. https://firmwarefile.com/gionee-max
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
11-04-2022, 05:33 AM
#4
Please reply ?
Waiting for your response
Abdulakeem14
Abdulakeem14
Abdulakeem14
Senior Member
1,757
11-04-2022, 03:03 PM
#5



(11-04-2022, 05:33 AM)atulnakul121 Please reply ?
Waiting for your response

Flash the system image using fastboot, then factory reset,
Also flash magisk patched boot.img
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
17-04-2022, 11:37 AM
#6
I tried to flash system but it says data too large how resolve it . Also when I tried to flash magisk patched image same error encountered. Thnks in advance. If you could build or port twrp. I will send pac link to him who will help me ❤️
hovatek
hovatek
hovatek
Administrator
49,570
19-04-2022, 08:59 AM
#7
(17-04-2022, 11:37 AM)atulnakul121 I tried to flash system but it says data too large how resolve it . Also when I tried to flash magisk patched image same error encountered. Thnks in advance. If you could build or port twrp. I will send pac link to him who will help me ❤️

Try flashing in fastbootd

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Gargoyle
Gargoyle
Gargoyle
Contributor
463
19-04-2022, 03:11 PM
#8
Have a nice day,

The last time I tried to flash GSI into a device with the s9863a chipset, after reading the various forums, which states, among other things, to delete the product partition, after flash gsi the system did not boot.

So in the end you had to do a repack of super.img, where I left product.img, but just an empty file, replaced system.img with gsi, I also had to modify build.prop to start it at all.

I can create a pac file with gsi, but ... it won't be today: D I don't have that much time.
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
20-04-2022, 03:45 AM
#9
(11-04-2022, 03:03 PM)Abdulakeem14
(11-04-2022, 05:33 AM)atulnakul121 Please reply ?
Waiting for your response

Flash the system image using fastboot, then factory reset,
Also flash magisk patched boot.img

I flash but it results in bootloop and I also try to flash blank vbmeta and try to disable verification but it fastboot stucked at writing vbmeta
atulnakul121
atulnakul121
atulnakul121
Junior Member
24
20-04-2022, 03:47 AM
#10



(19-04-2022, 03:11 PM)Gargoyle Have a nice day,

The last time I tried to flash GSI into a device with the s9863a chipset, after reading the various forums, which states, among other things, to delete the product partition, after flash gsi the system did not boot.

So in the end you had to do a repack of super.img, where I left product.img, but just an empty file, replaced system.img with gsi, I also had to modify build.prop to start it at all.

I can create a pac file with gsi, but ... it won't be today: D I don't have that much time
Ahh so assist me how to do that and will flashing with twrp work if works then please build it I will send recovery.img . And I am unable to check partition details as some apps shows it is A only and some A/B.
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram