tecno lc8
tecno lc8
(08-04-2022, 12:42 PM)erhiskobiOkay will try and give feedback(05-04-2022, 06:20 PM)Abdulakeem14(05-04-2022, 04:25 PM)erhiskobi(05-04-2022, 04:22 PM)erhiskobi(05-04-2022, 12:25 PM)Abdulakeem14 What's your device firmware build no?
Tecno Lc8 - H6215ABCD-GL.
Android Q
By the way, every other thing flashes well, just the "super.img" (which I believe is the system.img) that's the problem. If I untick it, the flashing will complete but the device still remains in red state, saying its corrupted. But if I tick it, sp flash tool says its TOO LARGE. Downloaded file from hovatek here and it's same build number with the device.
use the format+download option in sp flashtool
Thought about this too but afraid if the phone wont end up dead should the flashing process still gets interrupted at the super.img.
(08-04-2022, 12:47 PM)erhiskobi Was flashing the device then when it got to the super.img partition, SP Flash Tool says its TOO LARGE then the flashing failed and when the device boots up, it shows red state. And ive not been able to get past that TOO LARGE error
(09-04-2022, 09:05 AM)hovatekIt's the right build. Okay thanks(08-04-2022, 12:47 PM)erhiskobi Was flashing the device then when it got to the super.img partition, SP Flash Tool says its TOO LARGE then the flashing failed and when the device boots up, it shows red state. And ive not been able to get past that TOO LARGE error
Ensure you're flashing the right build.
You could try a firmware upgrade but do a full dump first just in case you need it
(05-04-2022, 06:20 PM)Abdulakeem14(05-04-2022, 04:25 PM)erhiskobi(05-04-2022, 04:22 PM)erhiskobi(05-04-2022, 12:25 PM)Abdulakeem14(04-04-2022, 03:06 PM)erhiskobi I downloaded tecno lc8 v290 but sp flashtool keeps saying super.img TOO LARGE when trying to flash it. Now the device is in Red State
What's your device firmware build no?
Tecno Lc8 - H6215ABCD-GL.
Android Q
By the way, every other thing flashes well, just the "super.img" (which I believe is the system.img) that's the problem. If I untick it, the flashing will complete but the device still remains in red state, saying its corrupted. But if I tick it, sp flash tool says its TOO LARGE. Downloaded file from hovatek here and it's same build number with the device.
use the format+download option in sp flashtool
(10-04-2022, 11:03 PM)erhiskobi(05-04-2022, 06:20 PM)Abdulakeem14(05-04-2022, 04:25 PM)erhiskobi(05-04-2022, 04:22 PM)erhiskobi(05-04-2022, 12:25 PM)Abdulakeem14 What's your device firmware build no?
Tecno Lc8 - H6215ABCD-GL.
Android Q
By the way, every other thing flashes well, just the "super.img" (which I believe is the system.img) that's the problem. If I untick it, the flashing will complete but the device still remains in red state, saying its corrupted. But if I tick it, sp flash tool says its TOO LARGE. Downloaded file from hovatek here and it's same build number with the device.
use the format+download option in sp flashtool
Device now dead after doing this
(10-04-2022, 11:03 PM)erhiskobi Same thing. Didn't get past there too. Now device is dead ?
(23-06-2022, 11:51 AM)erhiskobi Did this. All files flashed successfully, still didnt boot.