[hovatek]

This guide will explain how to bypass Factory Reset Protection on a Samsung Android device using its combination firmware / file. The principle is just to get into a Factory Binary from which you can make the desired changes.

Requirements

• Search for a combination firmware for your model
  
• Know how to use Odin to flash Samsung firmware
  
• Factory Firmware for your model. Ensure to choose the right firmware for your Samsung model
  

Steps to bypass FRP on Samsung using combination file / firmware

Follow the steps below to use a combination file to bypass FRP on Samsung devices

1. Load the combination file to AP in Odin (no additional settings) and flash to the phone. Disconnect and power up the phone once done
   
   
2. The phone should boot into Factory Binary
   
   
   
   
   
   
3. You should now be in the home screen
   
   
   
   
   
   
4. From the home screen slide down (from the top of the screen). Tap the Settings icon
   
   
   
   
   
   
5. Scroll down to About and tap it
   
   
   
   
   
   
6. Keep tapping Build Number till you see "You are now a Developer"
   
   
   
   
   
   
7. Go back to Settings, you should now see Developer options
   
   
   
   
   
   
8. Tap Developer options and turn on both USB Debugging and OEM unlocking
   
   
9. Power off the device and boot into Download Mode
   
   
10. Flash the factory firmware for your model and boot up.
    

Important Notice
Ensure to take note of the binary version when downloading a combination file / firmware