How to trigger mtk meta preloader mode on this MediaTek device
How to trigger mtk meta preloader mode on this MediaTek device
(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.
(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.No it isn't. (my other mtk devices are fully detected)
(10-01-2022, 08:00 PM)MFDGaming No it isn't. (my other mtk devices are fully detected)
(10-01-2022, 08:00 PM)MFDGamingI used SPFlashTool and used the format whole option and no the battery isn’t inserted.(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.No it isn't. (my other mtk devices are fully detected)
(10-01-2022, 08:00 PM)MFDGaming(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.No it isn't. (my other mtk devices are fully detected)
Also it isn't detected after the format
(11-01-2022, 08:00 PM)MFDGaming I used SPFlashTool and used the format whole option and no the battery isn’t inserted.
(11-01-2022, 08:54 PM)MFDGamingThere is no detection even with the battery(10-01-2022, 08:00 PM)MFDGaming(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.No it isn't. (my other mtk devices are fully detected)
Also it isn't detected after the format
(12-01-2022, 02:35 PM)MFDGaming There is no detection even with the battery
(12-01-2022, 02:35 PM)MFDGamingI've tried using a multi meter in continuity mode and when i connected points to ground the multi meter showed 0L and and the computer never detected the device, from what i read in general there must be like an KCOL0 point. My device seems to have a point that is called "KC", on the screenshot i sent that label is hidden under that metallic cover that is for some sensitive components probably, and yeah there was just 0 response and the multi imeter showed 0L. The points i shouldn't try are like PWY, VBAT, VCHG, D+, D- so the only points left are KC (It is next to the camera flash) and some unlabeled points next to the board revision label (you could see it in the screenshot). What could i try doing?(11-01-2022, 08:54 PM)MFDGamingThere is no detection even with the battery(10-01-2022, 08:00 PM)MFDGaming(09-01-2022, 04:39 PM)MFDGaming Its a MLS IQTalk Crystal Max phone. It has a MT6577 chipset. Ive seen other doing a circuit modification. I just need it cause I've formatted the whole flash so it doesn't go automatically to the preloader mode. I've confirmed that my USB cable and the drivers are fully working.No it isn't. (my other mtk devices are fully detected)
Also it isn't detected after the format