Hovatek Forum MOBILE Android [Please help] Dead Teclast p20hd after flashing
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Dead Teclast p20hd after flashing

[Please help] Dead Teclast p20hd after flashing

Pages (2): 1 2 Next
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
16-12-2021, 03:45 PM
#1



Hello!
After flashing my device with a new boot img (magisk patched) using SPD Research Tool it doesn't turn on any more (black screen/no usb connection). but the SPD Research tool showed successful flash.

I've tried reconnecting the battery. I've been reading https://www.hovatek.com/forum/thread-808.html
To check possible usb connection I use udevadm monitor on linux (tested with other devices).
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
16-12-2021, 04:20 PM
#2
(16-12-2021, 03:45 PM)teclastp2020hd Hello!
After flashing my device with a new boot img (magisk patched) using SPD Research Tool it doesn't turn on any more (black screen/no usb connection). but the SPD Research tool showed successful flash.

I've tried reconnecting the battery. I've been reading https://www.hovatek.com/forum/thread-808.html
To check possible usb connection I use udevadm monitor on linux (tested with other devices).

Here I attached a pic of the mainboard (bat plugged out).
[Image: attachment.php?aid=9843]
This post was last modified: 16-12-2021, 04:21 PM by teclastp2020hd.
Attached Files
.jpg
IMG_2021-12-16-14-27-37-494.cleaned.jpg
Size: 1,021.16 KB / Downloads: 34
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,302
16-12-2021, 04:33 PM
#3
Remove the battery complete and see if u can be able to flash back the stock boot image.
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
16-12-2021, 07:51 PM
#4
(16-12-2021, 04:33 PM)kelvinchinedu Remove the battery complete and see if u can be able to flash back the stock boot image.

Already did that, no usb signal.
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,302
16-12-2021, 07:54 PM
#5



Hold down the Vol - before u Connect
kelvinchinedu
kelvinchinedu
kelvinchinedu
Contributor
1,302
16-12-2021, 07:57 PM
#6
Hold down the Vol - and power before you connect
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
16-12-2021, 10:36 PM
#7
Thank you!! It shows up and can be flashed. Tried to flash a boot img! Worked!

I think before that I tried to flash a wrong vbmeta and boot image..

So I tried to flash a new signed vbmeta img -> failed: wait input timeout (I kept holding the buttons during the whole flashing process, I'm using the latest r24 flash tool) Sad How to fix that?
This post was last modified: 16-12-2021, 10:45 PM by teclastp2020hd.
Attached Files
.png
2021-12-16-224525_674x631_scrot.png
Size: 19 KB / Downloads: 8
hovatek
hovatek
hovatek
Administrator
49,570
17-12-2021, 09:24 AM
#8
(16-12-2021, 10:36 PM)teclastp2020hd Thank you!! It shows up and can be flashed. Tried to flash a boot img! Worked!

I think before that I tried to flash a wrong vbmeta and boot image..

So I tried to flash a  new signed vbmeta img -> failed: wait input timeout (I kept holding the buttons during the whole flashing process, I'm using the latest r24 flash tool) Sad How to fix that?

Is this the vbmeta from the pac file? Or you created and signed one?
This post was last modified: 17-12-2021, 09:25 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
17-12-2021, 11:34 AM
#9
(17-12-2021, 09:24 AM)hovatek
(16-12-2021, 10:36 PM)teclastp2020hd Thank you!! It shows up and can be flashed. Tried to flash a boot img! Worked!

I think before that I tried to flash a wrong vbmeta and boot image..

So I tried to flash a  new signed vbmeta img -> failed: wait input timeout (I kept holding the buttons during the whole flashing process, I'm using the latest r24 flash tool) Sad How to fix that?

Is this the vbmeta from the pac file? Or you created and signed one?

thank you hovatek, it was signed by myself, but I decided to reflash everything. Now it evens shows the boot-logo and fastboot mode. I sucessfully unlocked the bootloader.
but I couldn't flash nv_lte and super partition. Maybe I'm using a wrong pac.
Do you know firmware files of old version for my device (teclast p20hd, n6h3)?
This post was last modified: 17-12-2021, 11:35 AM by teclastp2020hd.
teclastp2020hd
teclastp2020hd
teclastp2020hd
Enthusiastic Member
13
17-12-2021, 02:07 PM
#10



(17-12-2021, 11:34 AM)teclastp2020hd
(17-12-2021, 09:24 AM)hovatek
(16-12-2021, 10:36 PM)teclastp2020hd Thank you!! It shows up and can be flashed. Tried to flash a boot img! Worked!

I think before that I tried to flash a wrong vbmeta and boot image..

So I tried to flash a  new signed vbmeta img -> failed: wait input timeout (I kept holding the buttons during the whole flashing process, I'm using the latest r24 flash tool) Sad How to fix that?

Is this the vbmeta from the pac file? Or you created and signed one?

thank you hovatek, it was signed by myself, but I decided to reflash everything. Now it evens shows the boot-logo and fastboot mode. I sucessfully unlocked the bootloader.
but I couldn't flash nv_lte and super partition. Maybe I'm using a wrong pac.
Do you know firmware files of old version for my device (teclast p20hd, n6h3)?
Done!
I've got it working with manually flashing nv_lte like here https://forum.xda-developers.com/t/tectl...t-85571419

then I fully reflashed the firmware.pac, now I'm going get this tab rooted myself..

Thanks guys! Smile
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram